China Plate Heat Exchanger Br Series Gasket Plate Heat Exchanger Beer Beverage Chemical Oil Pasteurizer Heat Exchanger

Application

Pasteurization

Normal cooling and heating in dairy, brewage, beverage, food industries, etc

Heating and cooling in pharmaceutical industry

Standard design

frame

The plates and compression plates are suspended from the upper load bar and are positioned by means of the lower guide rods which are fixed through the struts and ard fitted with washers on the tensioning bolts for disassembly of the equipment, frames and columns with adjustable supports.

A device may include many heat exchangers, which are separated by connection boards with interchangeable connectors.

Front plate

The front plate is used for meeting higher requirements in food processing. The combination of the high pressure depth, plate type and relatively few contacts make the running time longer and there will have no interruption. The diversing type can ensure that the liquid flows the whole plate. The end diameter enables it to carry out CIP cleaning with the same fluid it uses during the use.

Sealing gasket

The heat exchanging plate is provided with the sealing gasket that is not bonded by glue. Users can carry out easy replacement operatio of the sealing gasket even when the plate suspends inside the frame.

Working principle

Pasteurization

Normal cooling and heating in dairy, brewage, beverage, food industries, etc

Heating and cooling in pharmaceutical industry

The plate heat exchanger is composed of group of corrugated metal plates. The holes on it form channel for liquids to flow, and the heat will be transferred between two kinds of liquids.

The plates are assembled between a fixed frame board and a moveable clamping board and are tightened by the tightening bolts.

These plates are installed with sealing gasekts. The sealing gaskets play the sealing function on the channels between plates and make the liquids flow into adjacent channels. The quantity of plates are determined by flow, physical properties and temperture of liquids. The joints can be located on the frame board and claming board.

Standard materials

The frame and clamping board can be subjected to painting on the surface or coated by stainless steel. The movable nut on the fastening bolt is made of carbon steel and stainless steel.

Plate type

BR-0.06, 0.13, 0.22, 0.3, 0.5, 0.65 Plate: Stainless steel SS304, 316, 316L

Sealing gasket type

NBR or EPDM, Silicone Q

Technicals

Mechancial designed pressure/temperature

Designed pressure 1.0Mpa

Woring pressure 0.6Mpa

Working temperature -10 degree to 150 degree

Joint type

DIN, SMS, ISO, males thread or customized

Product Name:Plate Heat ExchangerPlate Material:304 or 316LBody Material:304Gasket Material:NBR, EPDM, etcMax Working Pressure:3MpaWorking temperature:-10°C - +150°CCooling:Single stage or two stagesSize:1m², 3m², 5m², 7m², 10m²Packing Details:Usually Plywood case for each plate heat exchanger for directly shipping. Extra
wooden case is availabe when necessary

Gasket Material CharactristicsMaterialWorking TemperatureWorking EnviromentNBR-25~120°CAlkane, olefin and other non-polar media, all kinds of mineral oil, animal and vegetable oil, hot water, salt water, etc.EPDM-50~170°CSuperheated water, steam, atmospheric ozone, non petroleum based lubricating oil, weak acid, weak base, ketone alcohol, etcHNBR-25~150°CCrude oil, sulfur-containing oil and organic sulfur compounds, some heat transfer oil, new refrigerant 134a, etcViton-25~150°CNonpolar mineral oil, high temperature water vapor, sulfuric acid, chlorine water, phosphate with concentration above 98%

Q1. What is your terms of packing?
A: Generally, we pack our goods in plywood case or carton package for small parts.
If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T in advance, 30% as deposit, and finish 70% balance payment before delivery.
We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 3 to 4 weeks after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.

Q6.Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.