China Plate Strap Burning Machine Bus Bar Welding Machine Element Welding Machine

COS Machine

Equipment parameters:

Plate strap burning machine
Parameters and functions

Power supply: AC220 +N+PE,fluctuation:±5%,Power:<=1500W;Air source & water source:

Compressed air:≥0.55MPa,Dry and clean;
Water source:0.2-0.3 MPa Tap water or deep well water
Gas:Natural gas or acetylene 0.1-0.15 MPa,Oxygen 0.4-0. 5 MPa,The gas must be dry and clean, the pipe must be supplied with stainless steel or copper pipe and customer must have¢8 rolls of lead wire.;

Outline dimension:2400(L)x1200(W)x2700(H); Burning efficiency:12V100AH(7+8-); Burning time≤140 Sec,adopting 2 working-station cycle burning;Compatible battery model and requirements:for 1*3,1*4,1*6 structure battery, after burning, the plate group is directly inserted into the battery container,for 2*3structure battery, it needs to be transformed to be 1*3 structure with two no.,after burning, the plate group is directly inserted into the battery container;Battery length 260-475mm,Plate height145-216mm,plate width145-160mm,Different modes of batteries should be replaced with different fixtures, comb plates, pressing strips, pressing heads, etc.;Equipment characteristic

Adopt automatic loading comb plate(clearance between separator and Plate strap≥6mm),Manual arranging lug, loading pressing strip, placing lead pole and parts;
The plate strap adopts robot arm burning, which has the functions of automatic ignition, flameout, changing flame and automatic cooling.;
The lead wire is sent by a servo drive gear, which could detect the presence of the lead wire, the diameter of the lead wire is 8±0.1mm, and the lead wire is required to be smooth and straight without a burr depression;

The battery is lifted to the assembly line through the hoist; Environmental protection:lead dust adopts side-down air absorption,the equipment equipped with dust collection device, lead smoke adopts side-up air suction, meeting environmental protection access conditions of battery industry.

9 Electrical components: Delisi or Japan Hequan brand; PLC, touch screen: domestic well-known brand; cylinder: domestic famous brand D; motor: Taiwan Delta or other joint venture brands, electric control box equipped with Jack for maintenance.

Equipment characteristics:
1) This machine adopts temperature control mode for cast welding. When the demoulding temperature reaches the setting temperature, the battery can be released from the COS mould, to ensure battery cast-welding quality.
2) Welding speed: 40-80s/mould (2-3 batteries from 1 mould; for 6V4Ah specification, 9 batteries from 1 mould).
3) Small occupied space, easy operation, fully-sealed design, safe and environment-friendly.
Performance advantages:
1. All control can be realized through advanced intelligent PLC interface. The interface can intuitively reflect all technical parameters on-site work.
2. Intelligent design, reliable running, easy operation, no special requirements for employees.