China Ploughshare Mixer for Dry Mortar

1. Horizontal Coulter Mixer:
The Horizontal Ploughshare Mixer is a new efficient powder mixing machine. It is widely used in chemical, paint, pharmaceutical, food, animal feed, fuel, metallurgy, mining and other sectors of solid-solid, solid-liquid mixing, as well as humidification granulation, drying, concentration and other complex processes.
The Ploughshare Mixer consists of the transmission part, horizontal cylinder, coulter group shaft, flying cutters, discharging valve, and spraying system.
The transmission part includs the cycloidal pinwheel decelerator and the coupling. It plays a part in transferring the motor's movement into the needed speed and torque and passing to the shaft.
The shell is made of rolled steel plates and used for containing materials. There are a number of holes in the tube for access and observation uses.
Coulter shaft support is fixed to the cylinder cover on the two sides.
The main mixing shaft consists of the coulter and coulter arm, with the coulter arm installed on the shaft as the HALF structure for easy removal.
The flying cutters are driven by the vice motor and installed in the lateral side of the cylinder. In order to prevent dust entering the bearing, the flying cutter shaft uses multi-layer sealed structure.
The outlet valve is installed at the bottom of the tube (except continuous discharge), which is used for closure and discharging. It works on through the handle and the four-bar linkage.
The spray device is fixed on the circumference of the cylinder and uses the agricultural spray nozzle, whose spraying effect is good.
2. Application:
Powder-Powder, Powder-Grain, Powder-Liquid, Grain-Grain, etc.
3. Options:
(1) Motor: Ordinary motor, Explosion-proof motor, Frequency conversion motor.
(2) Decelerator: Xseries gear decelerator, Cycloid decelerator, Worm decelerator.
(3) Discharging valve: Flap valve, Ball valve, Butterfly valve.
(4) Control: Manual control, Pneumatic control, Electric control.
(5) Feeding inlet: Standard, Designed as requirement, Manual feeding inlet( with cover).
(6) Jacket, Limpet Coil, Spraying System, Flying Cutters, Heavy duty type, Insulation Layer
4. Seal:
Teflon, packing seal.
5. Material:
Carbon Steel or Mild Steel(Q235B); Stainless Steel (304, 316, 316L, etc. ).
ModelFull volume
(M3)Loads coefficientMain Motor Power
(KW)Flying Cutter Motor (KW)Weight (kg)LDH-0.10.10.4-0.631.1kw430LDH-0.30.30.4-0.641.5kw950LDH-0.50.50.4-0.65.51.5kw1100LDH-110.4-0.6112kw1800LDH-220.4-0.618.53kw2520LDH-330.4-0.618.53kw3200LDH-440.4-0.6224kw4836LDH-660.4-0.630 8775LDH-880.4-0.645 9360LDH-10100.4-0.655 9750LDH-12120.4-0.655 10660LDH-15150.4-0.675 11050