China Poe Power Splitter Waterproof Power Over Ethernet Splitter 48V in 12V Output

Poe Power Splitter Waterproof Power Over Ethernet Splitter 48v in 12V Output

Specification:

The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet.

Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices.

Passive Power over Ethernet SET is compatible with most devices available on the market such as D-link, linksys, Airlive, Senao, Wline, Micronet, Edimax etc.

Passive PoE`s range is normally form 30-40 metres/100-130 ft (the real distance depends on the power supply, type of cable and powered device).

The pair POE cable include: 1 pcs INJECTOR and 1 pcs SPLITTER. Complete set for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices such as D-link, Ovislink, Senao, Wline, Router BOARD, WRAP boards and other devices using passive POE injection.

Connector Barrel size is 2.1mm (5.5 x 2.1 mm) Power Pins 4,5 + and 7,8 - .

It is very simple to connect a passive PoE.

1. On the lower part, we connect the Ethernet RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter to the power socket.

2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end. 3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them.

Input / Output Specifications DC Input Voltage:3-57VDC

DC Output Voltage:12VDC Max Output Current 1.5A-2A Max.

Over Current Protection None Work range:below 30 meters.

General Sepcifications: Operating Temperature -40°C ~ 60°C (-40°F ~ 140°F)

CASE OF MATERIAL PVC Ethernet Date Rate 10/100Mbps

Ethernet Cable TIA/EIA 568 Cat.5e

Humidity Up to 90%

Weight: 70g

DC Plugs 2.1mmx5.5mmx12mm

Length 190mm
Picture:

Poe Power Adapter: