China Poly Carbonate Box of Single Phase Energy Meter

ITEMCHARACTERÍSTICSUNIT.REQUIRED GUARANTEED1Data General1.1Country- IndicateCHINA1.2Manufacturer- Indicate. HEMG1.3Model- IndicateHEMG-D1012Characterístics2.1Standards of manufacture and tests IEC 62208, IEC60529, IEC 62262 IEC 62208, IEC60529, IEC 622622.2Type of Lock, that this one does not part with the box to an effort of traction (Spike of Security with coil W ¼ ") -Traction effort >= 50 kgfTraction effort >= 50 kgf2.3 System of flexible Autohobble in two points and located in the low part of the lid YesYes2.4System of operatio of the circuit breaker YesYes2.5WeightgrIndicate1525 g2.6 Protection degree IP for box ( for single phase meter ) closed, according to IE 60529IP≥ IP43 (indicate)IP432.7Marked Brand of the manufacture, date of manufacture, Yes2.8 Ventilation system-Yes (Indicate type)Yes3Cover3.1MaterialPolycarbonate not recycling ( first use )Polycarbonate not recycling ( first use )3.2 Brand and type or code of polycarbonate (indicate)Mitsubishi S2000UR3.3Design-According schemesYes3.4Dimensions External (Height x wide x Depth)mm
335 x 192 x 30335 x 192 x 303.5Color Clear and colorlessClear and colorless3.6Méthod of manufacture- Injected into Counterfoil Melting method or solvent method3.7Minimum thickness of the covermm333.8Weight of the covergr(Indicate)3753.9Protection degree to mechanical external impacts, according to IEC 62208IKIK10, 20 JouleYes3.10Marked- 3.11 Band with surface not transparent, roughly or mike rugose that allows the labelled exterior with indelible down or painting enamels- 5 cm of width located in vertical form in the right side of the lid (frontal sight)Yes3.12 Resistance to the abnormal heat and to the fire according to IEC 62208- Up to 650°CYes3.13Classification of inflammability according to IEC 60695-11-10-V-1Yes3.14Resistant UV-YesYes4BODY4.1Material PolicarbonatePolicarbonate4.2 Brand and type - code of polycarbonate (indicate)Mitsubishi S2000UR4.3Color-RAL 7032RAL 70324.4Method of manufacture- Injected into CounterfoilMelting method or solvent method4.5Referential design-Drawing 1Yes4.6Dimensions mínimum internals Height(L) x Wide(A) x Depth(P)mm320x180x110 (Note 1)320x180x1104.7Minimum thickness of the bodymm3 mmYes4.8Weight of the bodygr(Indicate)1064g4.9 Protection degree to mechanical external Impacts according to IEC 62208IKIK9, 10 JouleYes4.10 Resistance to the abnormal heat and to the fire according to IEC 62208 Hasta 650° C.Yes4.11Classification of inflammability according to IEC 60695-11-10 V-1Yes4.12Resistant UV YesYes4.13 Elements of Fixation:
a) Rail ( DIN 50022; 35 mm), to install switch termomagnétic.
b) Element of fixation of electronic single-phase meter.
c) Element of fixation of condenser of energy reactivates.
D) Spread (space) to lodge electric quality recorder.


yes

yes


yes ( Aprox. Ø : 40 mm)


yes
Yes, meeting all the requirements4.14 Disposition of circular holes to spend cable:
- lateral right face (quantity and diameter)
- lateral left face (quantity and diameter)
- low face (quantity and diameter)
- top face (quantity and diameter)

Mm

Mm

Mm
Mm


1 hole, Ø 30mm

1 hole, Ø 30mm

2 hole, Ø 30mm
2 hole, Ø 30mm
Location according to Graph N°1Yes, meeting all the requirements4.15 Protection lid of the circular holes to spend cable protected from material polimérico detachable manually Yes , of polymeric material detachable and flexibleYes, meeting all the requirements4.16 Presentation of a sample of the box YesYes