China Polyurethane Dispensing Machine for Electronics Automatic Glue Machine Automaic Speed Glue Mac

Polyurethane Dispensing Machine for ElectronicsModel: PGB-700
Applications: Capacitor, Power Supply, Transformer, Ignition Coil, Reverse Sensor, Circuit Board, Electronic Ballast , Other Electronic Products Where Glue Potting Demanded.Application Areas:
1. Electrical Products: Microsensors, sensors ,ignition coil , electronic parts, integrated circuits, circuit board solder paste, fixed and dust and moisture protection, LCD liquid crystal screen, speakers, headphone, audio, LED, optical lens, SMD transformers, relays.
2. Communication Products: Communication box ,Keypad, mobile phone casiVentilation Equipment ng bonding, radio, telephone, Computers, MP4, electronic toys, chassis bonding, switches, connectors, plug cable.
Suitable Materials:
Epoxies , Urethane(PU) or Silicone .
Two components glue, AB glue, AB part glue, silicone, epoxy resin, polyurethane;
All kinds of two-component mixed glues with required ratio, such as epoxy resin AB glue, polyurethane, silica gel, PU glue, flocking glue, paint, etc.
Artificial glue potting VS Intelligent glue potting :
The problems of potting by manual: 1. Artificial glue potting completely rely on manual operation, easy to proportion deviation and uneven mixing
2. The waste of glue is too serious. It is difficult to control the flow of the product manually. The container that glue passes is very much, waste glue is one of them, the bucket that sticks to glue secondly is not easy to clean, can increase a lot of filling glue bucket to wait for consumable material
3. The consistency of products is poor, and there are many uncontrollable factors in the production process, such as poor glue dispensing, inaccurate amount of glue dispensing, easy manual fouling of products, uncontrollable quality of each batch of products, consistency, defective products, too much waste, increasing costs.
4. Manual glue filling is slow and expensive
5. It is difficult to manage, labor is expensive, flexibility is not strong, recruitment is difficult, and output cannot be guaranteed.The advantages of using intelligent dispensing machine for potting :
1. Fully automatic operation, accurate proportion and even mixing
2. Glue pouring while mixing, LCD Module no waste of glue and no waste of consumables. Precise pouring and dispensing.
3. The glue amount of the productCrane is consistent and good. The edge of the machine is clean without glue
4. Machine glue pouring speed, relatively lower cost
5. There is no need for glue pouring staff, only one operator is needed to complete the mass productionMachine Tech data:
Model No:PGB-700Mixing Ratio100:100-10:100(1:1-1:10)AdjustableMetering precision±1%Outflow speed1g/sec-15g/secMixing precision±1%Mixing modeDynamic mixing /Static mixingGlue ViscosityLower than 20000 CPS(mPa·s)Control modePLC + Touch ScreenControl systemIndependent R&DMeasuring modeStepping motor/High-precision, wear-resistant,
long-life Gear pumpWorking voltageAC 220V 50Hz/60HzPower requirement3.55KWAir pressure requirement4.5-8 mpaMachine Dimension1500(L)*1200(W)*1500(H)mmWeightapprox 260 KGWork environmentHumidity: 20%~98%RH; Temperature: 0~+40°c
Features:
1. Automatic metering and mixing, touch screen PLC control system, English operation interface allow easy to set parameters;
2. Big LCD screen displays various processing data;
3. Easy programming of dots, stripes, arcs, compound arcs and patterns on different planes;
4. Gluing speed and timing can be set;
5. CAD file can be imported and turned to be dispensing patterns, and downloaded via USB; (optional function)
6. Mixing ratio 1:1-1:10 and gluing volume can be set and adjusted asSecurity Guard per actual need. Dynamic mixing ensure two component glue to be mixed to a fully homogeneous consistency;
7. Metering, mixing and gluing simultaneously;
8. Two tanks keep A glue and Bglue separately;
9. Liquid level sensor, alarm function;
10. Tank stirring and vacuum defoaming function optional;
11. Auto cleaning; The cleaning mode can be manually or automatically, manual mode just remove the mixing tube then soak into cleaning agent, after 10 min take out and clean with compressed air, Automatic mode only need to operate the cleaning switch on touch screen within 1 minute to complete;
12. Glue tank/metering pump/glue pipe heating function (optional);
13. Vacuum control keeps thin fluids from dripping;
14. Unique control system which will not influenced by air pressure factor, ensures optimal dispensing performance;
15. XYZ axis can be programmed to dispense glue along desired patterns.
Machine description and working principle
PGB-700 system accurately meters, mixers and dispenses two component medium to low viscosity materials for potting gasketing, sealing, encapsulation and syringe filling. The system ratio form 1:1 t0 10:1.
The system is composed of material tank, metering pump, metering motor, material pipe, two component valve, motor for dynamic stirring, mixing tube and 3 axis robotic arms. Two kinds of glue are separated before they mix in mixing tube, so the glue will not cure in devices. Glue valve is with vacuum function to keep thin fluid from dripping. Other optFurniture Making Machine ional functions include:
Tank stirring function;
Tank defoaming function;
Thermostat heating function on Tank, pipe, and valve;Advantage of automatic glue dispensing machine:
Dispensing robots automate most fluid assembly processes ensuring fast and repeatable deposits without mess, waste or error. For making repeat dots, beads, arcs and circles with any fluid, adhesive or paste. Easy to setup and run and these systems are supplied complete.