China Potable Water Pressure Tanks for Pumps

Pressure tanks are essential for whole house applications, toilet blocks and larger pressure systems.Even basic domestic applications will benefit from the inclusion of a pressure tank. Dezhi® pressure tanks are manufactured either in full Stainless Steel or with a pure Polypropylene liner coupled with a high-grade Butyl diaphragm which is held against the wall of a tank with a special steel ring. The brass air valve is sealed by a threaded O-ring valve cap to prevent air leaks. The threaded water connection fitting is stainless steel to avoid corrosion, and provides a unique water/air seal preventing leaks. The diaphragm and the liner are both reinforced in expected areas of wear, for longer life, and there are no wetted steel parts to avoid corrosion. All the internal parts including the air valve are smooth to prevent damage to the diaphragm. The steel tank exterior is coated with a two-pack polyurethane paint finish over an epoxy undercoating providing excellent long-term UV and corrosion protection.Applications• Domestic and Commercial
• Irrigation Systems
• Toilet Blocks
• Hydraulic Hammer Arresting
• Multi-Unit Dwellings
• Pressure SystemsFeatures & Benefits• Reduces cycling of the pump which extends the pump life
• Also reduces electricity consumption as the pump does not start on every use of the tap.
• Adjustable pressure via leak-proof standard air valve
• Comprehensive factory testing
• Certified under AS4020 for potable waterConstruction• Single Diaphragm design
• Two pack polyurethane coating over epoxy primer*
• Stainless Steel threaded Inlet
• No wetted Steel parts for prevention of corrosion
• Virgin Polypropylene Liner* with Butyl Rubber Membrane
(* on the steel tank)Available as:• Pre-tested Assembled System complete with any Dezhi® Pump, Pressure switch and Gauge or Variable Speed Drive
Company profile

Taizhou Tianyang Electrical co.,LTD. Is located in Shangma industrial Zone,Shitang Town,WenlingCity,Zhejiang rovince,covering an area of 15,000 square meters.Our Company has over 30 years experience in mold design and exploition. "DEZHI"and "AQUALEADER" are our proprietary brand of our company.We have produced pressure tank for more than 20 years.Available volumes range from 0.15 to 1500 liters.and working pressure from 4 bar to 25bar. Our products are applied to pump systems .Our products are exported to numerous overseas clients.We can custom design and manufacture products according to client-supplied requirements.
We adhere to the business philosphy"Credibility,Quality and service",our scientific management is based on the domestic market, but facing to the world.Warmly welcome customers both domestic and from abroad.We sincerely hope to cooperate and develop together to create a better future.
Taizhou Tianyang Electrical Co.,Ltd. Is always your most loyal partner.

I would like to take this opportunity to introduce our company to you. I am contacting you on behalf of Taizhou Tianyang Electrical Co., LTD. We are the factory from China for making Pressure Tanks for Fire Protection,Residential Water and Irrigation, Sport Turf and Landscape Irrigation, Agriculture and Horticulture Irrigation, Water Filtration, Treatment & Recycle, Solar and Stock Water System, Rain Water Harvesting, Pump Systems. based on ISO quality management system, we have obtained CE, KC, ISO 9001, ISO14001, OHSAS 18001, SGS, Water Mark, and Wras Certificates for our company & our Pressure Tanks. Welcome to visit Taizhou Tianyang Electrical Co.,LTD when it is more convenient for you.

Single Diaphragm Pressure Vessel
A range of reliable vessels, available in 10 and 16 bar pressure ratings and sizes from 3 to 200 litres. The series is constructed of a virgin polypropylene liner combined with an Certificated high grade butyl diaphragm, which is held against the wall of the tank with a steel clench ring. The tanks design includes rounded internal parts to prevent piercing and a unique connection providing a dual water/air seal for a complete leak and maintenance free vessel.
Solar Aqualeader tanks are quality tested at several stages on the production line to insure the structural integrity of every tank. Solar Aqualeader tanks represent the best value for the investment and are the best quality pressure vessels available today.
Single Diaphragm Pressure Vessel Structure
Specifications:Single diaphragm design 100% potable quality butyl,we also have EPDM Membrane For Irrigation Purpose. Patented 316/304 stainless steel connection. Virgin polypropylene liner, so no water touches plain steel.Internal clench ring becomes more secure at higher pressures.High quality two part polyurethane, epoxy primed paint finish - Almond. Brass stemmed air valve and O-ring sealed valve cap,we have our own patent pressure valve.No need any maintaince during life time.CE, WRAS,KC,Water Mark/UPC/SGS approvals.Maximum temperature up to 99 °C.Standard maximum pressure 150 PSI / 10 Bar.For Super Aqualeader ,we have appied 240 psi/16 bar5 To 7 Years Warranty According To Clients RequirementsMaterials:Diaphragm: high grade butylLiner: polypropyleneClench ring: steelAir valve: brassValve cap: threaded o-ringWater connection: stainless steel SUS 304/SUS316Exterior: steelPump stand: Engineering plasticMarket Sectors: (Applied with different membrane---Butyl/Epdm)DomesticCommercialAgriculturalIndustrialIrrigationMiningApplications:Water booster systemsThermal expansionIrrigation systemsHydraulic hammer arrestingTechnical Parameter

ModelTank VolumeMaxi Working PressureDiameterHeightConnectorPackagexLiterBarmmmmInchcmTY-12-2G810/16220340122x22x34TY-12-2G-W810/16220320122x22x32TY-12-3G1210/16260360126x26x37TY-12-4.5G1910/16290400131x31x40TY-12-4.5G-W1910/16290380131x31x38TY-12-6.3G2410/16295460131x31x46TY-12-9.3G3610/16360470136x36x47TY-12-11G6010/16420540142x42x54TY-12-15G8010/16460580146x46x58TY-12-22G10010/16460700146x46x70

FAQ Details:
1.Q: What is your MOQ of this item?
A: We are a factory, have stock. 1PCS is ok!
2.Q: What is the delivery time?
A: 7-25 days after receiving orginal L/C or deposit by TT.
3.Q: Is it all right to make customer's own brand name?
A: Yes we supply OEM service. Please send us a authorization doc.
4.Q: Where is your Loading Port?
A: Ningbo, Zhejiang, China.
5.Q: What are your payment terms?For Bulk Quantity Purchase
A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
For Samll amount Trial Order ,Please arrange the full payment
6.Q: What is your company's available production capacity?
A: 50000~60000 pieces of Pressure Tank per month.
Welcome To Visit Us
Please do not hesitate to contact me if you have any questions.

Yours Sincerely

Tom Lee
-----------------------------------------------------------
Tom Lee
Business Development Manager
Ph:
Cell:+86-18917007187