China Poultry House Cooling Pad Production Line

Poultry House Cooling Pad Production Line
1. PD up paper machine
(1) The use of four walls at the same time support the two rolls through the reducer transmission mode, the exact realization of the paper roll clamping, lifting, sequencing and other actions, thereby reducing the paper on the labor force.
(2) Top selection of inflatable chucks to reduce paper waste
(3) Paper width is 70cm-120cm.
(4) Support biggest weight is 3T.
2. PD-740 resign machine
(1) Adopts 8 digital controlled, temperature the same, heating efficiency increases, lower consumption of electricity.
(2) Adjust electric box output power by skilled situation.
(3) Bake part of the use of special materials focused on reflective light baking
(4) Power : 120kw
3. Full-automatic cutting machine
This device has automatic order length, counting, cutting, reducing the error+-0.5mm, not cutting wet paper in produce, will reduce 1-2 people labor force.
4. PD-2540 model cooling pad customized machine
Using the national standard wear-resistant materials processing, electric heating temperature, control the length of the paper size, according to the temperature of the device to adjust the speed of the device speed.
This device is part of the transmission by the electromagnetic clutch motor speed, through the reducer to adjust the rotation of the roller, the device automatically temperature control smooth operation
5.glue machine
This equipment is made of GB 45 steel, which is equipped with the same amount of plastic, so that the glue on the amount of glue on the amount of easy to operate, save time
6.quick oven
The use of internal heating fast drying, fast heating, high thermal efficiency, reduce drying costs, the external fan to increase the speed of the internal circulation, automatic temperature control.
7. Sawing
This machine is the cutting of the curtain into a block or strip of cutting equipment.
A description of the operation
First put the material neatly on the table, adjust the size of the baffle, the material on the baffle, boot the table can do cutting work.
Second note
(1) cutting operations should pay attention to safety, gear cover can be adjusted up and down, the standard for the sub-cutting plate thickness of the rest of the blade body cover the inside.
(2)track (table below the four T-iron) every class refueling, to ensure that no oil-free work.
(3) baffle gears, racks every class refueling, to ensure that no oil-free work.
(4) Saw blades do not work loose time, do not always tight.
(5)attention to the operation of the machine every time the boot, if you hear the sound is not normal than before the noise, should check the four wheels of the bearing is intact, the method is to loose the blade loose shake the wheel is loose, there is loose description of the transfer Has been broken, should be replaced in time, otherwise it will wear off the shaft and the wheel.
(6)machine power supply for the 380v, three-phase power supply, indispensable work, otherwise it will damage the motor.
(7)cutting work in the table limit position do not collision limit (track on the four buffer spring), otherwise it will swing the table, affecting the cutting accuracy.

Specification:
Components of the whole equipmentItemNamePictureQTYWeight
(KG)Voltage
(V)Power
(KW)Size(mm)
(L*W*H)1Resin Machine

14000380120.52100x2500x36002Electric cabinet for resin Machine

12004151201200x600x23003Cutting Machine

1400220v22000x500x5004Corrugating Machine
5090
112003802.23400x800x12005Sawing Machine

110003802.23000x600x26006Monolithic curing machine

18003802.24100x1400x23007Monolithic curing machine
Electric cabinet

1100380601200x600x14008Gluing Machine

110003801.13300x700x11009Oven Machine
130003803.53000x5500x250010Electric
Cabinet for oven
1100415150900x500x1200Frequently Asked Question:
1.Q: What makes your products different from other company ' s?
A: Highbetter provide customize service, warranty service, with strictly quality control and very competitive price.

2.Q: Do you offer a warranty on your products?
A: Yes, for the products we can provide 1 years warranty time from the date of delivery.

3.Q: What type of materials do you use for your products?
A: It's stainless steel blades, aluminum alloy hub, Galvanized fan frame . Special material also available.

4.Q: Do you have any certificate?
A: Yes, we have CE certificate and so on.

5.Q:Do you have a separate quality departments?
A: Yes, we have QC department. Will make sure you receive the perfect product.

6. Q: Is there quality control on all production lines?
A: Yes, all production line have adequate quality control.

7. Q:Payment Options Available?
A: 1. T/T
2. L/C
3. D/P
4. D/A
5. Western Union, Paypal, Trade Assurance