China Powder Coating Drive in Racking

Description:
1).Drive-in racking is also called corridor-type racking, composite structure, specialized high-intensity drive-in brackets, high-strength drive-in beam, frames are connected to top beams by bolts & nuts.
2).The depth of the single side drive-in racking which is against the wall should not be more than 9 pallet locations, and that of double side drive-in should be less than 15 pallet positions so as to ensure the loading efficiency of forklifts and stability of racking.
3).It's best to make drive-in lower than H11000mm because of its not so good stability which is the weakest compared with other racking system.
4).The drive-in racking should be equipped with back, top cross beams, etc. to stabilize the racks.
5).This type of racking is densely arrayed, making full use of storage space; both "first in first out" and "first in late out" are available, suitable for storing few types of goods with large quantity.
6).Widely used in milk, drink industry, and also be welcome by cold storage.
7).Upright specification:NH2 TYPE(90 TYPE),NH4 TYPE(120 TYPE),he non-standard size can also be customized by clients.
Advantage:
A.Suitable for storing small variety but large quantity goods;
B. Highest space utilization for warehouse storage among standard racks;
C.Each aisle has several layers of pallet support rail which pallets can be stored on it well one by one;
D.Convenient for forklift operation along the aisle;
E.Top and back bracings are fixed to the rack that makes it more stable and safer;
F.First layer pallets can be stored on the floor;
G.Surface treatment: powder coating, galvanized;
E-catalog can be privided if you need, just let me know.Thanks.
Any further questions,you can talk with me online.
Our company's website:www.tr-rack.com
W H A T S A P P: +86 18094226563
Workshop: