China Power DC to AC Inverter Charger with Pure Sine Wave

Power DC to AC Inverter Charger with pure sine wave output
1:dc to ac inverter, power inverter, inverter charger, pure sine wave inverter, dc inverter, solar inverter
2:Inverter with pure sine wave output
2:Inverter can auto transfer dc power 12v/24/v/48Vdc to 110/115/120Vac or 220/230/240Vac
3:3 time peak surge power enable our inverter can be used for any inductive loads like motor, air condition etc
4:Inverter built in super ac battery charger
Inverter Application
UPSEN Power Star Series Inverter can be used for various home appliances, office equipment,
Solar power system, and other equipments which use single phase power
Inverter Key Features
1: Pure sine wave output (THD< 3%), available for sensitive loads
2: High efficiency up to 95% under line mode, and 88% for Battery Mode
3: Fast and powerful charger with 35A and 70A
4: 4-step progressive charging, 7 battery type selector
5: Accept generator's energy output
6: Automatically transfer between battery and line modes
7: Microprocessor control guarantees high reliability
8: Bypass without battery connected
9: Remote control function
10: Protection against: Over load, over temperature, over charging, low battery
11: Reverse connection(optional by hard connector)
12: Blackouts

Power Star Series Model No.PS1000PS2000PS3000PS4000PS5000PS6000 Nominal Power1000W2000W3000W4000W5000W6000W AC Input WaveformPure Sine Wave Voltage120VAC/230VAC Acceptable Voltage194-243VAC164-243VAC(wide mode) Line Low Transfer85V±4%/184(154 wide mode±4%) Line Low Return95V±4%/194(164 wide mode±4%) Line high Transfer135V±4%/253±4% Line high Return127V±4%/243±4% Frequency50Hz or 60Hz (Auto sensing) Line Low Transfer47Hz for 50Hz, 57Hz for 60Hz Line high Transfer55Hz for 50Hz, 65Hz for 60Hz AC Output Waveform Pure Sine Wave (bypass mode sync to input) Voltage120/220/230/240VAC (bypass mode sync to input) Voltage Regulation±10%rms (bypass mode sync to input) Frequency50Hz±0.3Hz (bypass mode sync to input) Peak Power3 times of rating power Short Circuit ProtectionYes,shutdown after 10ms Power Factor0.9-1.0 DC Input BatteryVoltage12V/24V12V/24V/48V24V/48V Minimum Start Voltage10V for 12V,20V for 24V,40V for 48V Low Battery Alarm10.5V for 12V,21V for 24V,42V for 48V Low Battery Transfer10V for 12V,20V for 24V,40V for 48V High Voltage Alarm16V for 12V,32V for 24V,64V for 48V Max Charging Current35A/70A Over Charge Voltage15.7V for 12V,31.4V for 24V,62.8V for 48V Transfer Efficiency Line Mode> 95% BatteryMode>88% power saverAvailable when the load is less than 25 Watts Indicators 7-LED DisplayFrom the right to the left,LED1 line mode (green lighting) LED2 inverter mode (green lighting). LED3 charging mode (yellow lighting)/ LED4 Fully charged (green lighting). LED5 over heat shutdown(red lighting)/LED6 Overloaded shutdown(red lighting)/LED7 Saving Mode (green lighting)3-LED DisplayCharging Mode(green lighting)/inverter mode(green lighting)/ Alarm (red lighting) Switch selectorSaving Mode is on/off when push the switch forwards/backwards,keeping it horisontal is turning the inverter off.Audible AlarmSounding when the heatsink's tem is over 105Cand shutdown after 30 seconds. Protectionslow battery/over charging/over temp/over load CommunicationsRS-232/USB(custom-made) Enviromental Operating Environment0-40C,0-90%RH(non-condensing) Audible Noise<60dB Physical Net Weight(KG)182022353840 Dimension L*W*H(mm)442*218*179mm 598*218*179mm *Specification are subject to change without prior notice