China Precision Dicing Saw for 8" Wafer Cutting

DS830 precision dicing machine uses the DS-300 software control system, imported high-resolution lens and camera to enhance graphics alignment accuracy and efficiency. DS830 is applicable to the cutting process of silicon, PCB, ceramic, glass, lithium niobate, alumina and quartz.
FeaturesGraphical and simulative display of cutting process Water and gas curtain employed to reduce cutting powder residue Multi-angle water spray Broken Blade Detector (BBD) option

Specifications
Configuration and performanceWorkpiece sizeΦ200mm | 180mm (for square)Groove depth≤4mm or customizeTable flatness±0.005mm/150mmAlignment system80x straight light + ring light (40x 210x optional) SpindleRevolution speed range10000~50000 rpmOutput power1.5kW(2.2kW optional) X axisDrive modeServo motorMax. stroke380mmStroke resolution0.001mm Feed speed range0.1~400mm/sY axis Drive modeStep motor + grating closed-loop control systemMax. stroke210mmStroke resolution0.0005mm Single-step positioning accuracy≤0.003mm/5mmIndex positioning accuracy ≤0.005mm/210mmZ axisDrive modeStep motorMax. stroke30mm Stroke resolution0.001mm Repeatability accuracy0.002mm Θ axis Drive modeDD motorMax. rotating angle380°Angle resolution0.0002° Basic specificationPower supplySingle phase, AC220V±10%Power consumption0.9kW (processing)0.8kW (warming up)Compressed airPressure: 0.55~0.8Mpa; average flow rate: 350L/minCleaning water Pressure: 0.2~0.4Mpa; flow rate 3.0L/minCooling waterPressure: 0.2~0.4Mpa; flow rate 1.5L/min Exhaust air rate1.8m3/min (ANR)Overall dimensions WxDxH775mmx960mmx1650 mmWeight 600kg

Environmental Conditions

• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.