China Precision Dicing Saw for 8" Workpiece Cutting

DS9100 precision dicing saw can be widely used for a variety of processing requirements. The 1.8KW spindle and high rigidity door structure are employed on dicing equipment, so it reduces the impact of spindle vibration on the cutting effect and improves the stability and quality of process. DS9100 is applicable to the cutting process of silicon, PCB, ceramic, glass, lithium niobate, alumina and quartz.
FeaturesAvailable for workpiece with the dimension of 250 x 250mmHigh rigidity door structureWith automatic image recognition functionWith NCS (non-contact height measurement) functionOptional BBD (Broken Blade Detector) functionOptional tool detection functionOptional online sharpening function

Specifications
Configuration and performanceWorkpiece sizeφ8 | ≤250mm x 250mmGroove depth≤4mm or customizeTable flatness±0.005mm/200mmAlignment system28x straight light + ring light 280x straight light + ring light(70x 140x optional) SpindleRevolution speed range6000~60000 rpm Output power1.8kW X axisMax. stroke260mmStroke resolution0.001mm Feed speed range0.1~600mm/sY axis Max. stroke260mmStroke resolution0.0001mm Single-step positioning accuracy≤0.002mm/5mmIndex positioning accuracy ≤0.005mm/260mmZ axisMax. stroke40mm Stroke resolution0.001mm Repeatability accuracy0.002mm Θ axis Drive mode DD motorMax. rotating angle380°Angle resolution0.0002° Basic specificationPower supplyThree phases, AC380V±10%Compressed airPressure: 0.5~0.7Mpa; average flow rate 350L/minCleaning water Pressure: 0.2~0.4Mpa; flow rate 4.0L/minCooling waterPressure: 0.2~0.4Mpa; flow rate 1.5L/min (0.3MPa/hour)Exhaust air rate5 m3/min (ANR)Overall dimensions WxDxH900mmx1050mmx1800 mmWeight 1200kg

Environmental Conditions

• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.