China Precision Dicing Saw for Wafer Cutting of 6" Inch

DS616 precision dicing machine uses DS-200 software control system with touch screen control so that the image alignment of workpiece is simple and convenient. The machine is equipped with high-power spindle and DD motor with higher accuracy that further enhance the dicing performance. DS616 is applicable to the cutting process of silicon, gallium arsenide, ceramic, glass, lithium niobate, alumina, quartz, sapphire, crystal and PCB in the application fields including diode, triode, MEMS, IC, LED, NTC, photovoltaic, medical device and scintillation crystal.
FeaturesConstantly monitor spindle air pressure, hydraulic pressure and current to reduce spindle damageCutting scope available on requestAvailable for 160mm x 160mm square plate Optional image automatic recognition functionOptional NCS function (non-contact height measurement) Reasonable structure, easy maintenance, reducing faultHigh degree of automation

Specifications
Configuration and performanceWorkpiece sizeΦ6" | ≤160mm x 160mmGroove depth≤4mmTable flatness±0.005mm/150mmAlignment system70x straight light + ring light(210x optional) SpindleRevolution speed range3000~40000 rpm Output power1.5kW X axisDrive modeServo motorMax. stroke240mmStroke resolution0.001mm Feed speed range0.1~400mm/sY axis Drive modeStep motor + grating closed-loop control systemMax. stroke170mmStroke resolution0.0005mm Single-step positioning accuracy≤0.003mm/5mmIndex positioning accuracy ≤0.005mm/170mmZ axisDrive modeStep motorMax. stroke30mm Scale resolution0.001mm Repeatability accuracy0.002mm Θ axis Drive modeDD motorMax. rotating angle380°Angle resolution0.0002° Basic specificationPower supplySingle phase, AC220V±10%Power consumption0.8kW (processing)0.7kW (warming up)Compressed airPressure: 0.55~0.8Mpa; average flow rate: 350L/minCleaning water Pressure: 0.2~0.4Mpa; flow rate: 3.0L/minCooling waterPressure: 0.2~0.4Mpa; flow rate: 1.5L/min Exhaust air rate2m3/min (ANR)Overall dimensions WxDxH665mmx850mmx1650 mmWeight 500kg

Environmental Conditions

• Use clean, oil-free air (dew point below -15ºC, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature (fluctuations within ±1ºC).
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, blower, heat generation equipment or oil mist generating parts.
• Please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.