China Prefabricated Exterior Wall Fibre Cement Sandwich Panels EPS Foam Panel Structural Insulated Pane

Prefabricated exterior wall fibre cement sandwich panels eps foam panel structural insulated pane
Product introduce of eps cement board
The lightweight composite wallboard produced by us has the characteristics of light weight, thin body, large surface, flat, solid core, heat insulation, sound insulation and waterproofing, noise reduction, fast installation and so on. This product is the most ideal fire-proof inner partition wall at home and abroad, the fire resistance limit is more than three hours, after the relevant quality inspection part sampling inspection, it is completely in line with the national building materials industry standards.
Product specification of polystyrene sandwich panel

Product nameLightweight composite cement sandwich wall panelLength*Width(mm)2270/2440*610Thickness(mm)607590100120150Applicationroofinterior wallexterior wall of floor

Product feature of eps cement panel
1.Environmental protection.
It is scientifically maintained through high-tech technology and has a high degree of mechanization. Unlike bricks, which are burnt at high temperatures, a large amount of exhaust fumes are burned. Therefore, the lightweight partition board is very environmentally friendly in terms of production, and has little impact on the environment and the atmosphere. And its raw materials are not harmful to the human body.
2.Fire prevention.
The lightweight partition board is very resistant to high temperatures. It can be held for several hours under high temperature combustion without damage, and the combustion will not release harmful gases.
3. Sound insulation.
Due to the addition of soundproofing materials during production, its sound insulation is very good and much stronger than ordinary bricks.
4. Light economy.
Because it is mechanized, its finished product is relatively low. It is light in weight and easy to handle.
5, moisture-proof, waterproof and corrosion-resistant.
Its water absorption is not as good as bricks, so don't worry that it will absorb the moisture in the air and make the air dry. It has a hard texture and very good anti-corrosion effect.
Product application of eps cement panel
Product install process of panel sandwich eps
1.Put wire,transport board in place,popup or down the wall plate and gauge double in the respective axis mount.
2.Any use of drilling to cut according to wall plate specifications.
3.Put cement binder and wall board in foundation.
4.Put cement binder,two pieces of the tenon on one side cement to wipe polymer mortar on any tongue and sides.
5.Installation,firstly prepare for the installation of plate moved into connection location,wall correction with a crowbar,use force tightly,to let polymer mortar extrusion from the joints in high spirits.
6.Adjustment,use wood wedge to bit into the bottom of the wall plate so that it adjust vertical formation
7.Correction,fix,use more than 2m or 2m guiding rule to check vertical,flat correction.
8.Grout,fill the pulp,use polymer mortar to infill and flatness after correcting the wall body,use polymer mortar to fill the gap size up or down.
9.Fixed,upper part of wall panels with Φ6mm or Φ8mm steel reinforce in the middle of walls by 45 degrees to bit into,the bottom with "7shaped"ribbed steel,one head is bitten into concrete base,the other head is bitten into the wall plate
Simple installation process:
1.Put wire2.Cutting3.Put cement binder4.Put cement binder
5.Adjustment6.Installation7.Correction8.Fill the pulp9.Fixed
If you are interested in our products,,more information and install video for reference.
Packing and shipping of wall sandwich panel price
1.Free packing (with normal pallet and packing belt)
2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package
3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container
Certificate
about us
Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture.
Certificate:SGS,TUV
Major Exported Countries:Middle Eat,Southeast Asia,Europe,South America
Contact us
Xiamen Zhongjingtai Building Materials Co., Ltd
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang


Website: www.zhongjingtai.com