China Prefabricated House Foam Wall Panels EPS Cement Sandwich Wall Panel

Prefabricated house foam wall panels eps cement sandwich wall panel
Product introduce of wall panel
This product has many advantages, the most notable of which are fire and sound insulation. 1. This product is the most ideal fire-resistant inner partition wall at home and abroad, with a fire resistance limit of 3 hours, and does not emit toxic gases, which conforms to national building material industry standards. 2. It has a good sound insulation effect, reaching 42dB, which meets the sound insulation requirements of national houses, which is much higher than the sound insulation requirements of other masonry bricks.
Face panel:5mm calcium silicate board
Core materials:main EPS,cement and fly ash.
Product features of sandwich panel
The fiber-reinforced silicate plate is used as the panel, the middle is filled with light core material, and the non-load-bearing lightweight composite wall material is compounded and formed. It is environmentally friendly, light and high-strength, heat-insulating and sound-proof, waterproof and convenient for construction. Performance: green, 100% non-asbestos, no radioactive materials; solid, lightweight, thin body, high strength, impact resistance, strong hanging force; heat insulation, sound insulation, waterproof.
Product application of 3d wall panel
It can be used as both interior and exterior partition walls or all kinds of decoration and building construction, and also the best materials for plants, apartments, hotels, office buildings and public constructions, etc.
In addition, they are used for compartments, households, bathrooms, the interior partition walls of kitchens.

Product specification of structural wall panel impact fireproof

Product nameZJT Lightweight Composite Cement Sandwich Wall Panel Length*Width (mm)2270/2440*610mmThickness (mm)607590100120150Applicationroofinterior wallexterior wall or floor

Product install process of lightweight concrete panel
Light weight composite sandwich wall panels installation process:
1.Put wire,transport board in place,popup or down the wall plate and gauge double in the respective axis mount.
2.Any use of drilling to cut according to wall plate specifications.
3.Put cement binder and wall board in foundation.
4.Put cement binder,two pieces of the tenon on one side cement to wipe polymer mortar on any tongue and sides.
5.Installation,firstly prepare for the installation of plate moved into connection location,wall correction with a crowbar,use force tightly,to let polymer mortar extrusion from the joints in high spirits.
6.Adjustment,use wood wedge to bit into the bottom of the wall plate so that it adjust vertical formation.
7.Correction,fix,use more than 2m or 2m guiding rule to check vertical,flat correction.
8.Grout,fill the pulp,use polymer mortar to infill and flatness after correcting the wall body,use polymer mortar to fill the gap size up or down.
9.Fixed,upper part of wall panels with Φ6mm or Φ8mm steel reinforce in the middle of walls by 45 degrees to bit into,the bottom with "7shaped"ribbed steel,one head is bitten into concrete base,the other head is bitten into the wall plate
Simple installation process:
1.Put wire2.Cutting3.Put cement binder4.Put cement binder
5.Adjustment6.Installation7.Correction8.Fill the pulp9.Fixed
Packing and shipping of precast concrete wall panel 100mm
1.Free packing (with normal pallet and packing belt)
2.Standard exporting packing (wrapped with plastic thin film,edge protect and good pallet): USD20-30/Package 3.Packing size: 1500-3000*610*1000mm Loading: 18 pallets per 20' container, 11000kgs-18000kgs per 20' container
about us
Xiamen ZhongJingtai building materials Co., Ltd, is a professional high-tech research and development company producing new wall materials, machinery and equipment development, technology production and promotion of product applications. The company is situated in the charming Xiamen city, with the convenience of water and land transportation and only ten minutes from the airport. We respond positively to the national policy on wall reforming. We have developed successfully wall panels that meet the energy saving needs of modern architecture.
Factory

Customers visit our factory
Contact us
Xiamen Zhongjingtai Building Materials Co., Ltd
Unit2A, Lianchang Building, No6-8 Huli District, Xiamen, China
Contact person:Jodie Huang


Website: www.zhongjingtai.com