Single Layer BOM Felt is made up of single base layer fabric and fiber layer. base layer is woven from synthetic filament or multi-filament. The structure is designed base on different paper machine, different press position and different type of paper. Fiber layer is consisted of different lap of fiber web and different diameter of fiber for the best trainability and fiber support index. It has good quality properties such as less elongation, easy to wash, no-mark on paper, long life performance etc. And can be used in all different kinds of paper making machine to produce all different kinds of paper.
Applicability:
1.Paper machine: kinds of paper machine
2.Speed: 100-500m/min
3.Paper: 8-40g/m2 kinds of paper
4. Linear pressure: 100-200kN/m
5. Strength: 2000-4000N/5cm Feature:5. Smooth felt surface and even pressure distribution.
Product
BOM feltMaterial:
Cylinder Super formingFourdrinierInclined wire machine Nip wire machine for forming section felt Press feltPaper machine
Cylinder Super formingFourdrinierInclined wire machine Nip wire machine for forming section felt Press feltPaper≥8g/m2kinds of PaperFeature: Less Elongation
Easy to Clean
No-mark on paper
Good filtration
Service life3 months - 9 months BOM TECHNICAL PARAMETER
Felt GSM: 700-1200g/m2
Felt GSM Tolerance:≤±4%
Air permeability: 30-120cfm
Tensile Strength: ≥2000N/5cm
Elongation Percentage: ≤ 1%
Width Variation: ≤±2cmm
Contact Us
Shirley
www.sunhongfabric.com