China Product Molding Machine for FRP Grating in Mini Mesh Size

Product Molding Machine for FRP Grating in Mini Mesh Size
Specifications:
Working principle: hydraulic lift
fast heating, strong operability
convenient installation
easy to operate and maintance
Fiberglass Molded Grating Machine detailed picture

Features:
Structure: Reasonable design, precise processing, stable operation performance, easy demoulding, convenient maintenanceCylinder: The inner surface is grind by grinding machine, sealed by imported oil. The whole cylinder can disassemble, convenient to change the spare parts.base: Use 140# steel as the skeleton, 14mm thickness steel as plate. Do planing to make sure of the stability and plane smoothness.Rod. High quality and high strength rods. Steel rod is grinded. Smooth and clean surface, firm and anti-abrasion. Reasonable distribution, easy demoulding. The rods can be adjustable according to customer's demands. Demoulding Poles lift device is driven by 2 cylinders simultaneously. Smooth operation, no swing phenomenon. Demoulding poles are firm and anti-abrasion. Demoulding poles lift up and down with the lifting device, easy to change, easy maintenance.Elastic connection between lifting board and beam. Parallel stable lift.
Charateristics:
Mold heating and cooling uses rectangular brass tube. Large contact area with the mold plate, fast heating and cooling and above the molds can also be heating and cooling. It is anti-corrosion and durable for the mold four border. Joints adopts stainless steel flexible joint connection for easy disassembly.Pipe connections are connected in parallel, using high-powered motor to inlet the water at highest speed. The upper side of mold is equipped with guard to avoid spreading resin.The module adopts delicate steel 45#. Surface is treated by grinding, polishing and plating process. smooth, easy demolding, the upper screw is locked, easy to adjust and change. Hydraulic pump station uses durable hydraulic parts made by Sino-Japanese joint venture which are specially designed and produced for our machines.
The following are the specifications of the standard molded panels at present. We can also meet
customers request for smaller sizes or thickness.please note below all size can customize!

Lengthxwidth
(mm)Thickness
(mm)Mesh (mm)Open area
%Weight
(kg/piece)


1220x36602538x386955

1220x36603038x386965

1220x36603838x386983

1000x20002538x386925

1000x20003038x386929

1000x20003838x386937

1000x40002538x386950

1000x40003038x386958

1000x40003838x386974

1220x36605050x507296

1007x30071338x386919

1007x30074040x406458

1007x30072540x406436

1007x20072540x406424

1007x20074040x406439

1007x40072540x406448

1007x40074040x406477

1007x300725100x2566/5042/58

1220x36603819x1942110

Cautions:
Before use the new mold clean up oil stains and other dirt inside the mold.Before use the mold please check if the screws loose or not. If loose, please fasten in time.Keep the mold slide adequate oil, prohibit knocking the I beam steel with hammer. Spray the demoulding agent three times, spray the agent after curing the last spray.After producing 3-4 grating sheets spray the demolding agent to the mold. Produce after the agent drying. In the following production please spray the demolding agent periodically according to the actual conditions.