China Professional 2 in 1 4D Hifu Face Body Lift Body Sculpture Ultra V Hifu Doublo Machine

What is 4D HIFU?

4D is the meaning of the three dimensions, this 4D refers to the development of technology in three dimensions of innovation.

The number of rows is multi-dimensional, the traditional HIFU shot once only can get 1 line, so it will be a little toublesome to do body weight loss. Butcan be freely adjusted from .Treatment of parts and regions are multi-dimensional: facial wrinkles, chest pulling,body weight loss.

Adjustable parameters are multidimensional: the distance between points and points, the distance between rows and rows. The energy of each point. The length of each line. These can be adjusted.

1,Combines traditional 3D hifu handles with Vmax hifu

2,One shot can be output 12 lines

3,A combination of dual handles. Can be treated with 360 degrees without dead ends.

4,Each cartridge has 10000 shots.
5,Screen can display the current number of points in real time. The value of each parameter.
6,Can be suspended midway. Can continue to use (will not reset)
The transducer information:

1. 4MHZ frequency used to transmit high- energy focused ultrasound to the skin, subcutaneous tissue, the ultrasound to penetrate the skin to a depth of 4.5mm, direct subcutaneous SMAS layer, forming "heat coagulation" regional,

targeted to thicker skin, such as cheeks, etc.

2. , 4MHz frequency ,used to release ultrasound energy into the dermis layer of 3.0mm,is responsible for activating the skin's dermal layer of collagen, effectively enhance the effect of the consolidation of the outline,but also improve large pores and reduce the appearance of wrinkles.

3. are responsible for transmitting 4 MHZ high intensity focused ultrasound subcutaneous fat layer to melt the fat cells. Then the metabolites of fat cells will be excreted by human body's metabolis.It is targeting the body.

Note: DS-6.0mm,8.0mm,10mm,13mm and 16mm transducer is onLY do for body fat reduction, skin tightening.

Detailed Images

Vmax Advantages
Because V-MAX HIFU focuses energy shortly and intensively on the target area while rubbing probe, it makes less pain than other HIFU brands
Various shot intensity, shot time and shot interval can be adjusted by user's purpose. As applying rubbing operation, reducing shot and interval time, operation time can be shorter than normal HIFU operation. These shorter operation time enables to do more operations and it helps to get good results rapidly.

V-MAX doesn't need maintenance cost which mostly made by cartridge changing. It reduces medical expense and increases competitiveness. And it helps to do additional treatment without big burden.
By adopting a probe-rubbing method which is not widely used in HIFU equipment, it is possible to perform detailed operation.
Water cooling system enables to give stable operation, though a long time working.

Advantages

1. It has different working heads for different operational areas:

-3.0mm is for the dermis layer;

-4.5mm is for the SMAS layer.

-6.0mm/8mm/10mm13mm/16mm for body fat layer

2. It's totally non-invasive and safe.

3. The effect will be shown after the operation, while the best effect will be seen after two months. It can be lasted for 2-3 years.
Treatment Scope

Face
1. Remove wrinkles on around forehead, eyes, mouth, etc.
2. Lift and tighten both cheeks skin.
3. Improve skin elasticity and shaping contour.
4. Improve jaw line, reducing "marionette lines"
5. Tighten the skin tissue on forehead, lifting the eyebrows lines.
6. Remove neck wrinkles, protecting neck aging.
Body
1. Body thinner, skin tightening
2. Fat reduction
3. Body slimming, body shaping
4. To promote and accelerate the body s metabolism

Model No.

SW-116B

Input voltage

220/110V; 50/60Hz

Rated current

1A

Rated power

150W

4D hifu Cartridge option:

1.5mm,3.0mm,4.5mm,(face);

6mm,8mm,10mm,13mm,16mm(body)

Cartridge lifttime:

10000 shots/pc

Vmax hifu cartridges

1.5mm,3.0mm,4.5mm,(face)
4.5mm (breast)
8.0mm,13.0mm(body)

Vmax hifu Cartridges

60000 shots

Frequency

Energy Output

SUNWINBEAUTY FACTORY LIMITED has series products certificates ISO13485/Medical CE/RoHS and other company series Certificates:

Sunwin adhere to the route of machines' OEM,ODM,development and production,No matter medical equipment,beauty equipment,or high-tech equipment,as long as the industry sales elite compeny required technical ancilary equipment research and development production tasks to SUNWIN,our R&D team start it,Then,with the shortest time and the best technology,we will put the research and development production and the best technology equipment to the industry sales alite company, help to form a unique marketing finally,we do R&D production,you do marketing!