China Professional Powder Coating for Security Doors

Professional Powder Coating For Security Doors
1.General Introduction:
This product is a kind of powder coatings with special purpose. It is designed for the bottom film spraying in the thermal transfer technology. The main raw material is modified polyester resin. By thermal transfer technology, the appearance of the bottom film can form a variety of patterns,

2.Product series:
We can provide products were used in electrostatic guns and frictional guns.
The product includes high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.

3.Powder physical properties:

Proportion :1.2-1.8 (depending on the color and gloss ) .

Particle size distribution: 100% less than 100 microns

Liquidity:120-140
4.Curing conditions:
200°C(temperature of the workpiece):10-20mins
5.Average coverage:
8-14m³/kg, the membrane is 60μm(calculate by 100% utilization rate of powder coating).
6.Packing:
Carton packaging, lined with double polyethylene bag, net weight 20 kg.

7.Storage requirements:
Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.
8.Health and safety:

This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.
9.Coating performance

Coating performanceTest itemsInspection standardsTest indicatorsImpact resistanceGB/T1732-199350kg/cmCupping testGB/T9753-19886mmThe adhesion (grid method)GB/T9286-19980BendingGB/T6742-19862mmPencil HardnessGB/T6739-1996HB-FSalt spray testGB/T1771-1991>500 hoursDamp heat testGB/T1740-1979>1000 hours Annotate:1.The above experiment uses 0.8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns. 2.The above coating performance may be lower as shiny and slightly lower.

10.Why choose our products?
1). We have our own factory. The good quality and the competitive is the advantage of our company.
2). The material we choose is always good and products always come out with high quality.
3). A trial order or sample orders are welcomed.
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
5). We will do our best to service you all the time if you have the further question.

11.MSDS for powder coating.

12.We have our own factory, 8 production lines and a complete set of testing equipment.
13.We will arrange for SGS testing at regular intervals. In order to confirm our products meet the environmental standards.
14.We do many certifications to confirm every parts meet the national standard.
15. We have exported to many countries, and getting unanimous praise. Also many customers visited our company.