China Professional Sealant Permatex Black Roof Silicone Adhesive Paint

Spray Electric Heating Reactor Silicone 3D Bbw Pocketbac Holder Mini Hand Sanitizer acrylic resin reactor
1) Reactor is the main chemical reaction of the typical production equipment, which is widelyused in resins, adhesives, paint, cosmetics, pharmaceutical and other chemical production.
2) To break down or combined the materials through mixing, filling and cooling, to promote thereaction of polymerization.
3) The reactor consists of body, gears, mixing devices, heating devices, cooling devices, seal composition.
4) Corresponding auxiliary equipment: distillation column, condenser, water separator,collecting cans, filters ect.
Brief description of the process
In view of the principle of confidentiality for customers, the following can only briefly describe the process.
1. The liquid material is added from the liquid feed port on the top of the reactor, and the powder material (or slurry) is also added to the kettle through the manhole under the protection of a dust collector.
2.Stir in the kettle with a paddle mixer.
3. With the rotation of the paddle mixer, the liquid material and the powder material (or slurry) are gradually mixed uniformly.
4. When the materials in the kettle meet the quality requirements, open the bottom valve of the kettle. The finished material is discharged to the finished tank.
5.Fill from the finished product tank to the filling machine.
I. Market prospects:
Disinfectant series products are necessary disinfection products for families, hospitals, and public health, and they play an important role in disinfection and sterilization especially when major epidemics occur. The market prospect is broad.
Types and main ingredients of disinfectants:
1. 84 disinfectant: the main components are deionized water, sodium hypochlorite and a small amount of surfactant, sodium hydroxide, stabilizer;
2. Hand disinfection solution: divided into 75% ethanol solution and disinfection gel, the main components are deionized water, ethanol, or gel additives;
3. Bacteriostatic foam hand sanitizer: the main ingredients are deionized water, germicidal disinfectant, surfactant, and hand protector;
1). Unsaturated resin, alkyd resin, acrylic resin, polyester resin, curing agent and complete sets of production equipment.
2). Emulsion, white latex, water-based polyurethane, water-based glue sets of production equipment.
3). 107 rubber, silicone oil, anc other sets of production equipment, hot melt adhesive.
4). Complete sets of production equipment.
5). PU glue, adhesive, grafted gum syrup glue sets of production equipment.
6). Complete sets of raw rubber production equipment.
7). Waste silicone cracking, distillion, recycling sets of production equipment.
8). Dispersion paints, coatings, stirring and mixing equipment.
fixed bed reactor
Our Services
Type
Volume(L)
Heating mode
Structure
Paddle structure
Shaft seals
Remarks
FYF-100
115
Three choices:
1.Electric heating
2.Steam heating
3.Hot water/oil heating
Three choices:
1.Jacketed with oil/water
2.Outer pipe/tube
3.Outer and inner pipe/tube
Three layers:
anchor paddle + block + ribbon;
turbine type, with a dispersing disc.
Three choices:
1. Single mechanical seal
2. Double mechanical seal
3.Packing
1.The power of motors, stirring speed level determined
according to actual requirements.
2.The thickness of the cylinder pressure to be
based on response.
FYF-200
220
FYF-300
330
FYF-500
535
FYF-1000
1050
FYF-1500
1550
FYF-2000
2080
FYF-2500
2600
FYF-3000
3120
FYF-4000
4120
FYF-5000
5150
FYF-6000
6150
FYF-8000
8180
FYF-10000
10200
FYF-12000
12200
FYF-16000
16200
FYF-20000
20200
FYF-30000
30300
Remark: data in this table for reference, the actual data according to specific process requirements, material viscosity, and other design.Main Technologies:1. Unsaturated resins, alkyd resins, acrylic resins, polyurethane and other complete sets of production equipment;
2. Latex, white latex, rubber coating, film coating, all-purpose adhesive and other complete sets of production equipment;
3. Glass, plastic, silicone rubber, sealants and other sets of production equipment;
4. Raw rubber sets of production equipment;
5. Silicone waste pyrolysis recycling old solvent distillation recovery sets of production equipment;
6. Hot melt adhesive sets of production equipment;
7. Various types of powder mixing auger sets of production equipment;
8. Various non-standard chemical equipment design, production and installation.Main products:
1. FY-20L ~ 30000L reactor;
2. NHZ-5L ~ 5000L kneader;
3. QF-5L ~ 5000L strong dispersion machine;
4. XJB-5L ~ 2000L planetary mixer;
5. DLH-5L ~ 1000L Planetary Power Mixer;
6. DSH-20L ~ 15000L conical twin-screw mixer;
7. WLDH-20L ~ 20000L horizontal ribbon mixer;
8. WZ-10L ~ 6000L weightless biaxial mixer;
Company Information500L Ss304 Chemical Agitator Steam Liquid Stainless Steel Pharmaceutical Heating Jacketed Heated Mixing Vesselelt Pva Glue Reactor