China Programmable Rubber Salt Spray Testing Chamber with Long Life

Programmable Rubber Salt Spray Testing Chamber With Long Life
Product Description:
Programmabe Salt spray Chamber adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.
Design standard:
CNS:3627,3385,4159,7669,8886;
JIS:D0201,H8502,H8610,K5400,Z2371;
ISO: 3768,3769,3770;
ASTM: 8117,B268.
Chamber Structure:
1. Salt spray chamber cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
2. A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
3. Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.
Standard Parameters

ModelHD-E808-120 Inner Box Size (Lx Wx H)120x 100x 50 cm Outside Box Size(Lx Wx H)190x 130x 140 cm Equipment MaterialBoth inside & outside shell of Salt spray test equipment adopt imported P. V. C rigid plastic board, and tank cover uses imported transparent P. V. C. rigid plastic boar Temperature Range35 centigrade degrees to 55 centigrade degrees Temperature Fluctuations≤ ± 0.5 centigrade degrees Temperature Uniformity ≤ ± 2 centigrade degrees Temperature Precision± 1 centigrade degrees Test Chamber TemperatureSalt Spray Method (NSS ACSS)35± 1 centigrade degrees
Corrosion-resistant Testing Method (CASS) 50± 1 centigrade degrees Saturated air Barrel TemperatureSalt Spray Method (NSS ACSS)47± 1 centigrade degrees
Corrosion-resistant Testing Method (CASS) 63± 1 centigrade degrees Brine Temperature35 centigrade degrees± 1 centigrade degrees Spray Quantity1.0~2.0 ml / 80cm2 / hr PHSalt Spray Method (NSS ACSS6.5~7.2)
Corrosion-resistant Testing Method(CASS)3.0~3.2 Lab Volume600L Brine Tank Capacity40L PowerAC220V, 10A Multiple Safety Protection DevicesCurrent discharge protection, over pressure protection, over temperature protection, over load fuse protection AccessoriesTesting Salt/ Measuring tank/ Equipment each 1 set StandardCNS: 3627, 3385, 4159, 7669, 8886;
JIS: D0201, H8502, H8610, K5400, Z2371;
ISO: 3768, 3769, 3770;
ASTM: B-117, B268

Product Features
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.
After-service
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Packaging & Shipping:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.