China Programmable Thermal Shock Test Chamber

programmable thermal shock test chamber

application:
Temperature shock tester is used to test the capability of material structure or composite materials to withstand the continuous environmental changes between extremely high temperature and low temperature during a short period, and therefore understand the chemical changes or physical damages caused by expansion from heat and contraction from cold in the shortest possible time. It is applicable to metals, plastic, rubber, electronics amongst other materials. The test result can be used as a reference or basis for product improvement.
programmable thermal shock test chamber features:
1.It is divided into three zones: high temperature zone, low temperature zone, and testing zone. The test sample is in static mode.
2.Using touch-control graph control as operation interface, easy to operate.
3.Applying wind route conversation to the shock method to distribute temperature to the testing zone for cold and thermal shock measurement.
4.For high temperature shock or low temperature shock, max. time is up to 999H, and max. circulation cycles are 9999 times.
5.The system can be used for automatic Circulation Shock or manual selective shock.
6.Adopt binary cooling system, with quick cooling effect. Cooling method is water cooling.
7.Can entering normal temperature. RS-232 and RS-485 communication.
Short introduction about ASLi factory:
We are a long history testing equipment manufacturer, in the past 25 years, we devoted to simulation environmental testing equipment and Mechannical vibration and shock testing machine.programmable thermal shock test chamber is our star products , and we had obtained the CE certification for this machine .
After-sale service:
Feedback within 2 hours, and offer solution in 4 hours and help to solve the problems.
Package: PP film first, and then 10mm foam between machine and the case, and outside is standard export plywood case.

technical parameters:Model TS-42(A~C) Internal Dimension WxHxD (mm)400x350x350 External Dimension WxHxD (mm)1400x1800x1400 Temperature Range of Testing zoneType A:-40 degree~+150degree(200degree is Optional) High temperature Range of Testing zone: +60 degree ~+150 degree (200degree is Optional);
Low Temperature Range of Testing Zone: -10 degree ~ -40 degree / -55 degree / -65 degreeExposure Time of High / Low TemperatureExposure Time of High Temperature: +60 degree ~+ 150 degree ( 200 degree is Optional ) 30MinsExposure Time of Low Temperature:-10 degree ~ Type A:-40degree / Type B -55 degree / Type C -65 degree 30MinsTemperature of Heat-Storing Slot / Heating TimeRT~200degree/about 45mins Temperature of Cool-storing Slot / Cooling TimeRT~-75degree/ about 100mins Temperature Recovery Time / Conversion Time≤5min/≤5sec Control Accuracy / Distribution Uniformity±0.5degree/±2degree Internal and External Material Material of the inner box is SUS 304# stainless steel,of the outer box is stainless steel or see cold-rolled steel with paint coated.Insulation Material High temperature resistant, high density, formate chlorine, ethyl acetum foam insulation materialsMechanics P.I.D+S.S.R+ Micro-computer balanced temperature control system Cooling System Semi-hermetic double-stage compressor (water-cooled type) / Hermetic double-stage compressor (air-cooled type)Security Protection Devices Non-fuse breaker, high and low pressure protective switch of the compressor ,refrigerator high-pressure protective switch, failure warning system, electronic alarmAccessories viewing window(special order) Compressor French "Tecumseh" Brand, Germany Bizer Brand Power AC220V 13 lines,50/60HZ, AC380V 35 lines,50/60HZ Weight (Approx) 450