Re Ba F series is all-glass tube solar collcetor, include horizontal type and vertical type.
1. Working principle of high pressure solar heater: Utilizes the alternative absorption coating on the inner surface of the vacuum tube, from the high-temperature environment super-conduction tubes, leads the heat to the water tank, and produces hot water
2. Easy to use, also convenient to install
3. Can be put in the courtyard, on the roof or balcony
4. Inlet water hole connects to the tap water, and the outlet hole connects to the tap water, and the outlet hole produces pressure hot water directly
5. Working principle of low pressure solar heater: Adopts the alternative absorption coating to absorb the solar energy, heat the water in the vacuum tube directly, through the cold hot water convection, changes the solar energy into heat energy to store in the water tank.
Model
IPFT-100-GS/SS
IPFT-150-GS/SS
IPFT-200-GS/SS
IPFT-300-GS/SSflat
plate
solar
collectorquantity
dimensions
light area
coating
header
insulation1
1,030*2,030mm
1*2.00
selective absorbing
Cu 22 mm
Glass wool1
1,030*2,030mm
1*2.00
selective absorbing
Cu 22 mm
Glass wool1/2
1,030*2,030mm
1/2*2.00
selective absorbing
Cu 22 mm
Glass wool2/3
1,030*2,030mm
2/3*2.00
selective absorbing
Cu 22 mm
Glass woolwater
tankcapacity
diameter
operating pressure
insulating layer
insulation thickness
connections
inner material
outer material100L
540mm/580mm
6bar
polyurethane
50mm
3/4″
SUS 304/SUS316L
color steel/SUS150L
540mm/580mm
6bar
polyurethane
50mm
3/4″
SUS 304/SUS317L
color steel/SUS200L
540mm/580mm
6bar
polyurethane
50mm
3/4″
SUS 304/SUS318L
color steel/SUS300L
540mm/580mm
6bar
polyurethane
50mm
3/4″
SUS 304/SUS319L
color steel/SUSsupportmaterial
Anti-corrosin
usehot Galvanized steel
Powder coated
Flat and slope roof installationconnection
pipeMaterial
Diameter
insulating material
insulation thicknessflexble stainless steel pipe
DN20-3/4″
elastomer rubber with protective PE film
20mm/13mm