China Protection Film for Electronic Product

PE Protective Film for Electronic Product
Specification
1/ Raw materials: LDPE
2/ Adhesive: Acrylic base
3/ Thickness: 45u~150u
4/ Color; Transparent/clear
5/ Standard specification: 1250mm x 200m/roll
6/ Adhesion: 5g/10g/12g/20g/30g/40g
7/ Film type: Non-Embossed/Embossed film
8/ Packing: Plastic core with 76mm inner dismeter, one roll/carton
TECHNICAL DATA
SURFACE PROTECTION SERIES
APPLICATION OF Protective Film
Preferably the PE film masking should be applied by mechanical means. But results are obtained at a temperature not above 80ºC.
PRECAUTIONS
Adhesive properties are susceptible to change due to following parameters: chemical state of the surface to be protected; presences of impurities within or on the substrates; adhesive surface over touching with solvent directly.
STORAGE
The PE film masking can be stored for six months, in its original packaging and dry conditions. The rolls should be protected from extremes of temperature and direct sunlight & UV light. Out of its containers, the PE film masking should be protected against dust and other impurities.
Tests should be conducted under actual applications conditions.
Main Application: Surface protection of PVC panel, PVC window profiles, Window sill, metals, stainless steel sheet, aluminum composite panel, aluminum section/window/profile, glass sheet, plastic sheet, decorative sheet, furniture sheet, etc.