China Pto Driven Hammer Mill in EU Market

biomass tree branches log wood chipping machine wood crusher crushing machine

When you send inquiry to ask mobile crusher for wood ,

please tell:

1 What is your raw material and its size?

2 What is the final output size you want?

3 What is the capacity you want per hour?

4 What is the voltage in your place?

CHIPPING&CRUSHING

In the whole charcoal making plant( wood pellet plant,) before raw materials are made into wood briquettebar
(biomass pellets), they need to be cut into much smaller but uniform particles. When the thickness is larger than
10mm or the size is over 50 * 50mm, wood chipper is needed to chip these materials into smaller pieces. Then
hammer mill will crush these small pieces into wood powder with diameter less than 3mm.

Wood Chipping Machine

DISC TYPE WOOD CHIPPER

Spiral chipper disc surface may be less than 400mm diameter cutting logs, wood and branches path material,
applied to paper pulp factory, forest games, paper mills, wood chips and other plants. Mainly by the chipper
host, couplings, chassis, motor, such as four-part composition, in which the host by the chipper knives plate,
upper and lower casing, a material feed port and the mouth parts, etc.

main technical parameters

ModelCapacity Power WeightMain shaft speedBlade qtyBlade diameterFeeding inlet size CDRW400 0.8-1t/h 7.5-11kw 160kg 650 r/min 3 pcs 400mm 150*150mm CDRW600 1.5-2t/h 15kw 380kg 600 r/min 3 pcs 600mm 180*150mm CDRW800 3-6t/h 22-30kw 520kg 550 r/min 4 pcs 800mm 200*200mm CDRW950 5-8t/h 30-37kw 950kg 550 r/min 4 pcs 900mm 230*250mmCDRW1150 8-10t/h 55-75kw 2000kg 500 r/min 4 pcs 1100mm 330*300mm CDRW1410 15-16t/h 110kw 2600kg 500 r/min 4 pcs 1400mm 400*400mmCDRW1500 15-25t/h 132kw 3500kg 500 r/min 4 pcs 1500mm 480*450mm

Crushing machine
For drying and briquetting process of biomass materials, crushing plant is available. We mainly manufacture two
types of crushing plants for various agro-forestry wastes, which are wood crusher and hammer mill. You should
choose the more workable one according to your raw materials.
DISC TYPE WOOD CRUSHER
Wood crusher is the special chipping/crushing equipment for raw wood of 50-250mm( diameter).During the
working process, the raw wood will be chipped, re-crushed and sieved, the wood crusher combines both
chipping and crushing in one machine to get the wood sawdust directly. The diameter of wood sawdust can
reach to 2-5mm, which is suitable for further drying and briquetting, no need to use other wood chippers,
wood crusher shows the advantage of precise structure, high capacity, energy consumption, high-quality
finished products, easy maintained, etc

ModelCapacity (kg/h)PowerPackage size(m)WeightCDW40300-40011kw1.3x0.9x1.0350kgCDW50400-50015kw1.5x1.05x1.3450kgCDW60500-600kg/h18.5kw1.5x1.1x1.4550kgCDW70800-1000kg/h22kw1.6*1.25*1.5650kg

HAMMER MILL
Hammer mill is to crush small sized material with diameter no more than 50mm, such like tree branches, tree
trimmings, wood chips, wood cuttings, cotton stalk, corn stalk, wheat straw etc. Blate type wood crusher is to
crush wood logs with diameter less than 200mm to 3-5mm at any length.

MODELPOWEROUTPUT(KG/H)N.W/G.W(kg)PACKING SIZE(cm)CF1582.2kw SINGLE/3 PHASE60-12075/9548*58*63CF1987.5HP GASOLINE200-300120/14090*58*102CF1984KW120/14090*58*102CF420B7.5KW400-600260/320112*82*107CF420C11KW320/360112*82*107CF420A15HP DIESE330/360147*73*109CF420A22HP DIESE350/390147*74*111CF500A55HP DIESE800-1100800/840150*142*123CF500B22KW600/630124*97*106

If you need more information feel free to contact with me by the following method: