China Punch machine with 5 Cavities for Aluminium Caps

punch machine for tear off seal & flip off seal
Technical specifications:

Capacity39,000-42,000pcs/hrOpreator1 personPower1.5KWVoltage380VEquipped with mould5 cavities 20mm aluminum seal mould or 7 cavities 13mm aluminum seal mouldDimension1900*1400*1800mmWarranty1 years for free components replacement

16 ton punch machine configuration:
1)Automatic discharge;
2)Automatic stamping;
3)Automatic pulling material;
4)Automatic screen out aluminum ring;
5)Automatic blow off the cap;
6)Automatic oil the aluminum strip;
7)Automatic collecting waste materials;
8)The aluminum strip is sent to the opreator automatically,so can inspect quality at any time;
9)The mold is equipped with advanced protection system,if any stuck of the aluminum cap,it can stop immediately.
Following are types of aluminum seal made by the punch machine
1, Punching machine (16 tons) with mould (3 cavities) & accessories, for 32mm aluminum cap
1.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V);
b. Mould with 3 cavities for 32mm cap, made as per customer's cap drawing and samples;
c. Machine control system;
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generator and cap blowing system;
g. Ring separator and conveyor belt;
h. Recoiler of waste material
i. Mould protection system;
j. Hand protection system;
1.2 Capacity: 24000-27000 caps per hour (frequency: 135-150 times/min)
1.3 Aluminium coil width: 151mm
1.4 Spare parts: 50% parts of the 5 cavities.
1.5 Tools: Standard tools for repair and maintenance of the machine & mould.
2, Punching machine (16 tons) with mould (5 cavities) & accessories, for 20mm aluminum cap
1.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V);
b. Mould with 5 cavities for 20mm cap, made as per customer's cap drawing and samples;
c. Machine control system;
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generator and cap blowing system;
g. Ring separator and conveyor belt;
h. Recoiler of waste material
i. Mould protection system;
j. Hand protection system;
1.2 Capacity: 40000-44000 caps per hour (frequency: 135-150 times/min)
1.3 Aluminium coil width: 151mm
1.4 Spare parts: 50% parts of the 5 cavities.
1.5 Tools: Standard tools for repair and maintenance of the machine & mould.
3, Punching machine (16 tons) with mould (7 cavities) & accessories, for 13mm or 15mm aluminum cap
3.1 Components of the Machine
a. 16 tons power press, 380V (compatible with 440V);
b. Mould with 7 cavities for 13mm cap, made as per customer's cap drawing and samples;
c. Machine control system;
d. Uncoiler and servo motor powered material feeder;
e. Aluminum coil lubrication system;
f. Air generator and cap blowing system;
g. Ring separator and conveyor belt;
h. Recoiler of waste material
i. Mould protection system;
j. Hand protection system;
3.2 Capacity: 55000-60000 caps per hour (frequency: 135-150 times/min)
3.3 Aluminium coil width: 159mm
3.4 Spare parts: 50% parts of the 7 cavities.
3.5 Tools: Standard tools for repair and maintenance of the machine & mould

Assembly machine for combine plastic part with aluminum seal
Model : LS-3
Capacity: 20,000-22,000 pcs /hr for 20mm flip off seal
Power : 3.0kw voltage : 380V
Assembling punches 30pcs for 20mm ,24pcs for 32mm
Dimension : 1400x1000x1300mm weight 600kg
Packing size : 1.5x1.2x1.4m main material : 201 stainless steel

Model : LS-4
Capacity : 30,000-33,000pcs/ hr for 13mm or 20mm
Power 3.5kw voltage : 380V
Assembling punches : 36pcs
Dimension : 1400x1000x1300mm weight 650kg
Packing size : 1.5x1.2x1.4m maine material 201 stainless steel