China Pure Teflon Coated Adhesive Tape

Gray, 3.5 mil (0.09 mm) PTFE extruded film with silicone adhesive.

Smooth and layflat backing. Provides an exceptionally smooth surface when applied and

resists curling during unwind. Chemically resistant surface for sealing and masking.

Typical Physical Properties

1. Extruded, calendered film tapes that resist curling during unwind and provide an exceptionally

smooth surface when applied.
2 Extruded PTFE film tapes lie flatter than typical skived PTFE film tapes.
3 Thicker backing helps extend the service life, compared to thinner versions,

when subjected to abrasion or wear.
4 Provides excellent chemical resistance except to organic solvents.

Note: The silicone adhesive will be attacked by commercial organic solvents and is not recommended

for applications requiring organic resistance.

5 To help prevent wrinkling or bubbling of the backing on PTFE film tapes when they are subjected

to temperatures above 250°F (121°C), pre-heat the surface to at least 150°F (66°C)

(preferred 180°F, 82°C) to obtain best results.

Application Ideas

1. Easy-release surface on rollers, plates, belts, etc. where build-up of sticky materials and inks can occur.
2. Low coefficient of friction surface on rollers, formers, etc. to facilitate web movement.
3. Chemical resistant surface for sealing and masking.
4. Wrapping rubber nip rollers on hot polyethylene extrusion machines

Packing:
Overlapped packaging with silicon release paper

1,We got stacks here. seal it with packing tape

2,check the stack make sure it tight and steady

3,then we prepare the cartons and put tapes into cartons

5 layers carton packaging with wrapping stretch film

1,Customized carton size (Normally 460x350x360mm)

2,Inset separetion cards Separation cards is necessary for fix the tape avoid move during transit

3,Strapping the carton, Using Strapping belt to reinforce the carton package