Perfomance Range
Flow rate up to 80L/min (4.8m3/h)
Head up to 90m
Operating Limits
Suction lift up to 8m
Fluid temperature up to 60ºC
Maximum ambient temperature 40ºC
Pump installation and applications
These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. Reliable, economical and simple to use, they are suitable for domestic applications and the automatic distribution of water from surge tanks, watering gardens and for boosting insufficient mains water pressure. These pumps should be installed in a covered area, protected against the weather.
Performance
High heads with respect to power requirements.
Stable perating curves, with small variations in delivery rates with respect to large variations in the pressure demand.
High tolerance of the presence of entrained air in the liquid being pumped.
Pump
Cast iron pump body and support under special anti-rust treatment.
Rust-free stainless steel inserts prevent impeller's block when starting after the pump is unused for a long time.
Brass impeller with evenly arranged radial vanes
Stainless steel mechanical seal (graphite to ceramic)
AISI 304 shaft
Motor
C&U bearing
Motor with copper winding
Built-in thermal protector for single phase motor
Insulation class: F
Protection class: IPX4
Warranty: 1 YEAR(according to our general sales conditions)