China Qiyun Auto Car Lift Two Post Car Lifter

Qiyun Hot sale auto car lift two post car lifter
The double post car lift is a kind of special mechanical lifting equipment commonly used in automobile repair and maintenance units. The double post lift is the main type of lift and is widely used in the repair and maintenance of small cars such as cars. The double post lift is a lifting device widely used in the maintenance of small cars such as cars. It is one of the common warranty devices in automobile maintenance enterprises. It has the characteristics of compact structure, beautiful appearance, easy operation, etc. It is suitable for automobiles The repair and maintenance unit eliminates the need for repair personnel to drill into the bottom of a car with a narrow space, and simply lifts the car to a certain height with this safe and reliable lifting equipment, and can quickly overhaul the parts at the bottom of the car.



Precautions for use:
1. The load distribution during use shall comply with the rated load distribution of the supporting arm specified in the instruction manual.
2. Before lifting the vehicle, the height of each pallet should be adjusted to keep the support points on the same level.
3 The skirt or girder that the vehicle is lifted must be placed in the center of the pallet, and the center of gravity of the vehicle should be located at the center of the support surface as much as possible.
4. After the tray is in place, the lift can only be started after the support arm is positioned reliably.
5. When the car lift is raised to 10cm from the ground, check and confirm that the car lift is safe and reliable. After the lift is operating normally, start the lift to the required working height. During the lifting process, no one is allowed to enter the vehicle.
6. Note that the power supply cannot be reversed, otherwise the limit switch will not work.
7. Lubricant should be replenished regularly to ensure that the screw nut is fully lubricated to prevent early wear.
8. When working in the environment of mud, sand and sewage, a protective cover should be added on the screw nut.
9. It is strictly forbidden to place repair tools, auto parts or other objects under the support arm to avoid damage to the lift.
10. Do not modify the lifter circuit by yourself to avoid failure, causing danger and accidental loss.