China Quarry Rock Jaw Crusher PE2436 for Primary Crushing Stage

Features
kinglink's jaw crusher is engineered for even the toughest mining applications thanks to its heavy-duty design. Characterized by an attention to detail in its design and manufacture, this machine is an excellent choice when you need high production and low total cost.
kinglink's crushers are of the single-toggle type with advanced features for optimized performance, easy maintenance, long life and a low cost per ton. These crushers feature a deep, symmetrical crushing chamber, easy settings adjustment, a large feed opening for its size, and an ideal nip angle that offers smooth material flow and high reduction efficiency.
Benefits
Simple structure, easy maintenance;Stable performance, high capacity;Even final particles and high crushing ratio;Adopt advanced manufacturing technique and high-end materials;
Easy to install

kinglink's Jaw crusher has a range of bolt-on options, including an on-board motor base, and guarding for the flywheel and drives made from specially developed composite materials, which makes the unit simple to install as a crusher only or as a complete module in a new or existing plant.The most versatile primary crusher
Kinglink's Series jaw crushers are most commonly used as primary crushers, to make the first step of size reduction. In some cases the jaw crushers is used to produce final end product but in most cases the jaw crusher is used to prepare the feed for the secondary crusher in a crushing and screening process.
Main Technical Data of PE Jaw crusher
Model
Feed
Opening
(mm)
Max Feeding
(mm)
Output Sise
(mm)
Capacity
(t/h)
Power
(kw)
Weight
(t)
PE-150*250
150*250
130
10-40
0.96-4.8
5.5
0.81
PE-250*400
250*400
210
20-80
5-21
15
2.8
PE-400*600
400*600
340
40-100
16-64
30
6.5
PE-500*750
500*750
425
50-100
45-100
55
10.3
PE-600*900
600*900
500
65-160
48-120
55/75
15.5
PE-750*1060
750*1060
630
80-140
115-208
110
27.02
PE-800*1060
800*1060
650
100-200
136-228
110
28.4
PE-870*1060
870*1060
670
200-260
290-384
110
30.5
PE-900*1200
900*1200
750
100-200
144-304
132
50
PE-900*1200II
900*1200II
750
100-200
144-304
132
45.8
PE-1000*1200
1000*1200
850
195-265
315-342
132
50.6
PE-1200*1500
1200*1500
950
150*350
300-800
220
83
PE-1500*1800
1500*1800
1200
220-350
450-1000
355
122
PEX-150*750
150*750
120
18-48
8-25.6
15
3.5
PEX-250*1000
250*1000
210
25-60
16-51.2
37/30
6.5
PEX-250*1200
250*1200
210
25-60
20-60
37
7.7
PEX-300*1300
300*1300
250
20-90
20-104
75
11
Note: Specifications may change without further notice.

The above figures represent through the crusher capacities, which are based on a feed material with an average specific gravity of 2.7 t/m3, a maximum feed size that will enter the crusher without bridging and material finer than the crushers closed side setting removed. The capacities may vary depending on the feeding method and on feed characteristics such as gradation, bulk density, moisture, clay content and crushability. Measurement of the crusher's closed side setting varies depending on the jaw profile that is being used and has an impact on the crusher's capacity and product gradation. The following factors will enhance crusher capacity and performance:
1. Proper selection of the jaws.
2. Proper feed gradation.
3. Controlled feed rate.
4. Sufficient feeder capacity and width.
5. Adequate crusher discharge area.
6. Discharge conveyor sized to convey maximum crusher capacity.