China RFID Livestock Tags RFID Animal Ear Tag

RFID Livestock Tags & RFID Animal Ear Tag

RFID animal Ear tag Brief introduction

What is an RFID animal ear tag? Commonly referred to as Electronic ID, EID or RFID (radio frequency identification), the unique design of this ear tag incorporates an air coil antenna system enclosed within a modified small female tag. This durable construction helps the transponder withstand tough environmental conditions.

How RFID Works?

EID ear tags for livestock are considered passive tags because they have no battery or power source of their own. The tags are activated when they pass within the transmission field of a reader.

The tag then absorbs power from the reader and returns its unique 15 digit number back to the reader.

There are two types of RFID ear tags. HDX (half Duplex) and FDX (full Duplex) ear tags.

FDX (Full Duplex) ear tags cause the return signal from the transponder to be initiated as soon as the interrogation signal is received from a reader and the smoothing capacitor has been charged.

HDX (Half Duplex) ear tags the return signal begins after the end of the interrogation signal has been received and the storage capacitor has been fully charged. The message is sent once because the storage capacitor has discharged its energy content after the code is sent.

HDX tags have a slightly longer read range and are more expensive. Many of these tags are available in a Tamperproof design and can also be paired with visual ID tags with the matching 15-digit EID number printed on the visual tag as well.

Item134.2khz rfid animal ear tagsR/W StandardISO11784/5 FDX-B International Standard or HDXDiameter29.9mm ± 1mmFrequency134.2KHzTension350NOperation Temperature-30°C to 50°CMaterialTPU(Thermoplastic polyurethane)ColorYellow, Red, Pink. etcGuarantee>5 yearsAnticollision StandardIEC 68-2-27ChipEM4305 Top quality imported original chipApplicationAnimal identification/Livestock farm management/animal breeding/ slaughter managementFeaturesUnique ID,Waterproof and anti-sheddingWeight10gVibrating StandardIEC 68-2-6TypeClosed, Opened reusable.

How to order?

1) Provide your specific requirements and vector artwork;
2) Quotation; Discuss with us by TradeManager, Skype, MSN or E-Mail

3) Confirm to place order
4) Our designer will make a bleed place as your design or our designer can make a design as your request
5) send Comfirmation draft and PI to you
6) Signed back the confirmation draft and make the payment
5) Start production after you confirm and payment
6) Production, about 5-10 days;
7) QC;
8) Delivery by DHL /UPS/Fedex etc. according to your shipping address.