China Radiolink At10II 12CH RC Transmitter Receiver R12ds 2.4G Dsss&Fhss Radio Remote Controller for

Radiolink AT10II 12CH RC Transmitter and Receiver R12DS 2.4G DSSS&FHSS Radio Remote Controller for RC Drone/ Fixed Wing Mode 2Please Note: The operation menu onLY support English and Chinese. Please contact us when you need full user manual.

Radiolink AT10II 12CH RC Transmitter and Receiver R12DS 2.4GHz DSSS&FHSS Spread Radio Remote Controller for RC Drone/Fixed Wing/Multicopters/Helicopter (Mode 2 Left Throttle or Mode 1 Right Throttle)

AT10 II Features:

-Excellent Anti-interference: only 3ms for 12 channels synchronously, Strong anti-jumping DSSS&FHSS working synchronously to keep the excellent anti-interference performance.

-Real-time Information: Model voltage, RSSI signal strength, speed, altitude, distance and more on the LCD screen display. Support extended engine voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when work with flight controller APM or PIX.

-Low Consumption of Battery: A 3s 1800mAh liPo battery can work more than 12 hours.

-Multiple Alarm: Low RSSI alarm setting, low transmitter voltage, receiver voltage and extended engine voltage alarm. DD sounds and words alarming display on the blacklight LCD screen to avoid ignorance when you are in noise environment.

-Voltage Protection System: Radiolink AT10 II has included a circuit which prevents damage if you plug it in the wrong way.

-Suit Multiple Models: Works with most racer quads on the market, suitable for FPV racing drone, helicopter, multirotor, car boat and more.

-Programmable Mix Control: Fully computerized mixer configuration for fine control over most basic model aircraft functions.

-Easy to update: Updatable firmware online via USB.

-Full-color display: Beautiful color LCD screen for configuration and telemetry monitoring, brightness adjustment. 3.5 inch colorful screen 320x480 resolution, clear display menu and graphs.

-Variety Switchs: Full array of 2 and 3-position switches, as well as momentary switches, knobs and sliders.

-Simple Setting: Provide basic menu and advanced menu, navigation menu remind next step setting, only takes 2 second to bind.

-Variety of size receivers: support Radiolink's R9DS, R12DSM, R6DS, R6DSM,R12DS, receiver compatible with SBUS, PWM, and PPM signal.

-Come with receiver: R12DS receiver included with purchase,Receiver integrate telemetry sensor including signal strength and voltage.

AT10II RC Transmitter Specifications:

Channels: 12ch

Mode: 2 (Left Throttle)

Frequency: 2.4GHz ISM bands (2400MHz to 2483.5MHz)

Channel Bandswidth: 5.0 MHz

Spread Spectrum: DSSS&FHSS

Adjacent Channel rejection: 38dbm

Transmitter Power: <100mW (20dbm )

Operating Current: <90mA

Operating Voltage: 7.4~15.0V

4096 Section Precision

Screen: 3.5 inches 16 colorful screen, 320*480 pixels

Support receivers: R12DS, R9DS, R6DS, R6DSM, and R12DSM

R12DS Receiver Specifications

Signal: SBUS,PWM

Channel: PWM 12 channels, SBUS 12 channels

Working Voltage: 4.8-10V

Working Current: 38-45mA(input voltage: 5V)

Size: 5*3.2*1.5cm

Weight: 20

Package Included:

AT10II Mode 2 or Mode 1 x1Radiolink R12DS Receiver x 1Radiolink PRM-01 voltageMode 1/2 changing parts x 1Simple user Manual x 1Transmitter Lanyard x 1