China Rdj300 500-2001400 Type Hot Isostatic Press

RDJ500/1500-200.2000 Type Hot Isostatic Press

Main Technical parameters

Maximum working pressure: 200MPa;Maximum working temperature: 1400ºCCommon operating temperature≤1300ºC;The effective diameter of heat zone:Φ300mm;The effective height of heat zone:500mm;Heating wire material: Molybdenum lanthanumTemperature measuring thermocouple: S dividing I level precision (GB/T1598-2010);Working medium: Ar ( Purity≥99.99%);Vacuum degree(room temperature,no working parts):≤100Pa;Vacuum extraction time (room temperature,no working parts):t≤15min;Maximum temperature deviation in the effective heat zone(800ºC~1250ºC,no working parts,Heat preservation stage,pressure30MPa~150MPa,according to GB/T9452-2012, taking out 5 point temperature measurement, using S grade dividing I thermocouple measurement precision of workpiece)):≤±10ºC;Heating up time (no working parts): room temperature~1250ºC≤3h;Loading mode: upper loading;Max loading capacity of work table:300kg;Power supply of whole machine:TN-S inlet wire,AC380V,50Hz;Full machine installation power:about 300kW;Install way: ground operation;

Operating conditions

Altitude:≤2000m;Temperature:+5ºC~+40ºC;Relative humidity of air is not more than 90%(when 20ºC;Power supply requirement:AC380V(±10%),50Hz(±1%),TN-Sincome wire system (Three-phase five wire system);Water supply requirement: Pressure 0.3~0.5MPa, Flow≥20m³/h,Water inlet temperature ≤30ºC,Water outlet temperature≤45ºC; The working limit height of the crane hook in the workshop of the hot isostatic press is from the ground≥7.5m,hoisting weight≥5t;A place free from fire,serious pollution,chemical corrosion,violent vibration and strong disturbance sources
Our main type of press is as follows:
1. Cold Isostatic Press:

S.NO.TypeDiameter of Pressure
VesselDepth of Pressure
VesselMaximum Isostatic
Pressure1CIP 200/300-300200mm300mm300Mpa2CIP 200/1000-300200 mm1000mm 300Mpa3CIP 420/4000-320420mm4000mm320Mpa 4CIP 500/1200-400500mm1200mm400Mpa5CIP 500/1500-300500mm1500mm300Mpa6CIP 710/2000-250710mm2000mm250Mpa7CIP 1000/3500-2001000mm3500mm200Mpa

a. The vessel inner materials is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the cold isostatic pressing (CIP) machine, increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running
2. Hot Isostatic Press:

S.NO.TypeDiameter of
Pressure VesselHeight of
Pressure VesselPressureTemperature1HIP 800/1200-150/1000800mm1200mm150Mpa1000degrees2HIP 1250/2000-200/14001250mm2000mm200Mpa1400degrees

3. Warm Isostatic Press:

S.NO.TypeDiameter of
VesselLength of
VesselPressureTemperature1WIP D500-L2000/P200mpa-T300500mm2000mm200Mpa300degrees2WIP D300-L1500/P250mpa-T200300mm1500mm250Mpa200degrees3WIP D630-L2000/P250mpa-T300630 mm2000mm 250Mpa300degrees

a.The vessel inner materials of WIP is 34CrNi3MoV alloy whole parts forged and then The forged vessel be wire wounded by alloy of wire(65Mn steel 1.5mm x 6mm size) as per the designed.
b.Whole procedure of the warm isostatic press machine (WIP ) , increasing, holding and releasing pressure is controlled by PLC and also there is a decompression system to protect the system over pressure to keep the machine in safety running.
Contact Us:

Marketing Manager: George SunTel:+86 13401926888
+ 86-25-84508704 Website:chinasun99.en.made-in-china.com Address:88# Zhujiang Road,Nanjing,Jiangsu,China