China Realhui MD-4030 Gold Metal Detector for Mine Sourcing Gold Detector Gold Hunter

Feature

1. Mode-Indicates which of the five detection modes (Zero, Jewelry, Custom, Relics or Coins) has been selected by highlighting the corresponding word on the LCD screen.

2. Target ID Legend-Works in conjunction with the Target ID Cursor to indicate a target's probable identity. Ferrous (iron) targets will indicate on the left half, non-ferrous targets that are thin or have low conductivity will indicate in the middle, and thick or high conductivity targets will indicate at the right.

3. Target ID Cursor (Upper Scale)-The Target ID cursor, in conjunction with the Target ID Legend, indicates the probable identity of a detected target. The upper scale consists of twelve (12) graphic segments for Target ID.

4. Lower Scale-The lower scale, or Notch Discrimination Scale, indicates the discrimination pattern. The MD-6350 will produce an audible target response for the pixels that are switched on, and no audible response for those that have been switched off. The Target ID Cursor will always indicate all targets. The discrimination pattern can be adjusted by changing modes and / or using the DISCRIM and Accept/Reject (√/x) pushbuttons.

5. Coin Depth Indicator- The depth of a coin, or similar sized target, is indicated in 2-inch increments. Sweep over the target with the search coil 1 inch from the soil to get the most accurate reading.

6. Battery Level Indicator-Indicates the current battery condition. The detector will maintain full performance until the batteries need to be replaced. Replace batteries when there is only 1 segment remaining. NiMH rechargeable batteries may be used, but may have a shorter life per charge. You can expect 20 to 40 hours of operation depending on battery type and quality. Access and replace the batteries by sliding the cover off the control housing. Remove batteries when the detector will be stored for longer than 30 days.

7. Sensitivity Indicator- has eight (8) settings for sensitivity.

1. Power: 4 x 1.5V AA

2. Frequency: 8.58 KHz

3. Current: Standby: 50mA

Max: 270mA

4. Voltage: 6V

5. Operating Temperature:

6. Sensitivity: US 25/50 Cent: 300mm

7. Indication Mode: LCD Mode

Sound Mode

8. Stretch Length: 42.5-51.2 inches

9. Detector Diameter:

10. Color: Yellow/Green

11. Weight: 1.7kg

12. Size:

13. Package Weight: 2.8kg

14. Package Size: 21.7(L) x 5.9(W) x 14.2(H) inches

Specification

Power supply

Four AA battery

Sensitivity

8 setting

Operation modes

All metal, Jewelry, Custom, Relics, Coin, Pinpointer

Coil

11*15"cm waterproof search coil with cable

Audio

Three-tone audio

Detected indication

LCD display

Battery Condition Indicator

Yes

Distinguish

Ferrous and non-ferrous

Warranty

1 years