China Red Garnet 80 Cutting Medium for Waterjet Cutting

2.Garnet Sand Application

(1).Waterjet Cutting
Faster Cutting - Crushed and selected from hard rock so that our waterjet grade garnet sand produces harder and sharper edges than other waterjet abrasives. These characteristics enable our garnet more like a hard and sharp cutting tool to finish a faster cutting.
Garnet sand has features of sub-conchoidal fracture, high hardness, good toughness and sharp edges. It can form new angular edges constantly during crushing and classifying. Waterjet cutting uses garnet sand as the cutting medium, relies on high-pressure water jets to water jet cut oil and gas pipelines ,steel and other components ,stainless steel, copper,metal,marble,stone, rubber, glass, ceramics.

3.Garnet Sand Physical Characteristics

Chemical Analysis

Silicon Dioxide (SiO2)

36.42%

Ferric Oxide (Fe2O3)

34.23%

Alumina Oxide (Al2O3)

20.72%

Calcium Oxide

1.98%

Magnesium Oxide (Mg)

3.29%

Electrical Conductivity
(Soluble Salts)

105 μS/cm

Chloride

0.0028%

4.Garnet Sand Normal Package
1. 25kg per bag(pp bag or paper bag), then 40 bags put in a 1000kg (2200lb) bulk bag.
2. 25 kg per bag(pp bag or paper bag), then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.
3. 25 kg per bag(pp bag or paper bag), then 40 bags in one box.
We can also pakage according to costomers' requirements.

5.Garnet Sand Production Technology

It goes through crushing,magnetic separation,washing , drying and screening production procedures.
Being crushed from natural garnet rocks, our garnet sand has high hardness and sharper edges. With many times magnetic separations to remove impurities,it keeps high qualified red grains. Then several times washing removes the powder away. After screening of sifting bed,each size has the uniform particle distribution.

6.Garnet Sand Detection and Certificate:

7. Company Profile

Jinan Junda Industrial Technology Co.,Ltd. is located in Jinan,Shandong Province,China,which is the daughter company of Honest Horse (CHINA) Holding Limited.We are the manufacturerof abrasive mediafor more than 15years experience in north China.

Abrasives media we manufacture:

Bearing steel grit

Cast steel grit

Steel shot

Glass beads

Garnet sand

The products reach the ISO9001 standard,SAE J444 standard and always enjoy a good reputation among our customers.

Our old and new customersdistribute over 100 countries around the world,in Asia, Middle East area,Europe, Africa,North America,South America,and Australia,etc.

We welcome customers all over the world do cooperation with us !