China Restaurant Meat Storage Cold Room

Restaurant meat storage cold room
1. Meat cold room wall panel
(1) The meat cold room panels male and female, cam lock type, use hexagonal key to assemble. Cam lock is pre-burried in the panel, put the key in the hole to lock.
There is a hat for the hole so that to decorate it.
(2)Meat cold room panels with gasket to prevent leaking the cold air.
(3)Our meat cold room panels meets JB/6527-2006<modular cold room insulation sandwiched panel's technology conditions> standard request.
(4)The foaming material we choose is imported BASF (US brand) foaming material, green to the environment.
The steel sheet we purchase from Baosteel and POSCO which are the biggest steel factories in the world, they promise the painted galvanized steel they produce will not fade in 15 years.
(5)Cold room wall and ceiling panel type
-0.326mm painted galvanized steel PU panel
-0.426mm painted galvanized steel PU panel
-0.5mm painted galvanized steel PU panel
-0.6mm painted galvanized steel PU panel
2. Cold room floor
-Outside 0.326mm painted galvanized steel inside 3.0mm skidproof aluminum polyurethane insulation panel
-bare polyurethane insulation panel, it is suitable for concrete floor, use trolley transport products.
-Outside 0.326mm painted galvanized steel inside galvanized polyurethane insulation panel
3. Cold room refrigeration unit
For cold room, will use Copeland split type refrigeration unit/monoblock
Refrigerant is R404A
Air cooled type
4. Cold room panel, refrigeration unit and fittings package
We use bubble paper as panels' package to prevent scratching.
Use plywood for refrigeration unit and carton for fittings
Panels are marked numbers as to let client install it easily.
5. Workshop
Workshop is more than 30000 square meters and has a complete set of imported CUSBER and OMS production line for polyurethane sandwich panels.

No.Inspection itemUnitTechnology inspectionInspection result1densitykg/m332~50432compressing strength (10% deformation)Kpa≥1602003Bending strengthKpa≥2453314Absorbing rate%≤435Heating coefficientW/m.k0.0240.0246Average burning timeS≤3037Average burning height (vertical)S≤250250

Panel thickOperating temperature50mm5degree C or above75mm-5degree C or above100mm-25degree C or above150mm-45degree C or above200mm-55degree C or above