China Revolving Dryer Revolving Dryer Equipment Conveyor Revolving Dryer

Product Overview
Double-cone rotary vacuum dryer is the newest dryer which combines mixing and drying functions. By matching the condensetallurgy-Machinery-p3748/">metallurgy Machinery r, vacuum pump and dryer, avacuum dryer unit is formed. (if there is no solvent recovery, condenser can be removed). This dryer is of develop design, simple inner structure and easy of cleaning, complete discharging of materials and easy of operation. It can reduce the labor strength and improve the workplace conditions. Meanwhile, because of the rotary motion, there is no accumulation of materials on the wall, so the heat transfer coefficient is high and drying rate is large, which can save the energy and make the materials drying evenly and of good quality.It is widely used in the material drying in pharmacy, chemical, food, dye, etc. And meet the requirement of [GMP".Suitable materials
For the chemical, pharmaceutical, food and other industries of powder, granular and fiber concentration, mixing, drying and low-temperature drying materials (such as biochemical products, etc. ). It is more suitable for the drying of materials that are easy to oxidize, volatile, heat-sensitive, intensely stimulating, toxic materials and materials that are not allowed to destroy crystals.
Installation demonstration
Performance characteristics
1 oil heating. Using automatic temperature control. Can be dried biochemical products
2 and mineral raw materials, the temperature can be between 20 ~160 oC.
3 High thermal efficiency, more than 2times higher than normal oven.
4 Indirect heating. The material will not be contaminated and meet the "GMP" requirements. Equipment maintenance is simple and easy to clean.
5 Recommended process placement demonstration solvent recovery process placement.
Schematic
Technical specificationsName/Specifications1003505007501, 000Tank volume1003505007501, 000Loading capacity (L)≤50≤175≤250≤375≤500Heating area (m2)1.1622.633.54.61Speed (rpm)4 -6Motor power (kw)0.751.11.523Coverage Cutter & Tongs length xwidth (mm)2160x8002260x8002350x8002560x10002860x1300Rotary height (mm)1750Other Electronics 2100225024902800Tank design pressure (MPa)-0.1-0.15Jacket design pressure (MPa)≤ 0.3Operating temperature (o C)Tank ≤85 Jacket ≤140When using acondenser, avacuum pump,2X-15A2X-15A2X-30A2X-30A2X-70AModel, powerHydraulic Tool 2KW2KW3KW3KW505KWWhen not using acondenser, vacuum pump,SK-0.4SK-0.8SK-0.8SK-2.7BSK-2.7BModel, power1.5KW2.2KW2.2KW4KW4KWWeight (kg)8001100120015002800Name/Specifications15002000350045005000Tank volume15002000350045005000Loading capacity (L)≤750≤1000≤1750≤2250≤2500Heating area (m2)5.587.511.213.114.1Speed (rpm)4 Machinery for Food, Beverage & Cereal -6Motor power (kw)345.57.511Coverage length xwidth (mm)3060x13003260x14003760x18003960x20004400x2500Rotary height (mm)29402990349041004200Tank design pressure (MPa)-0.1-0.15Jacket design pressure (MPa)≤ 0.3Operating temperature (o C)-0.1-0.15When using acondenser, avacuum pump,JZJX300-8JZJX300-4JZJX600-8JZJX600-4JZJX300-4Model, power7KW9.5KW11KW20.5KW22KWWhen not using acondenser, vacuum pump,SK-3SK-6SK-6SK-9SK-10Model, power5.5KW11KW11KW15KW18.5KWWeight (kg)33003600640075008600Note: For materials with large volume changes before and after drying, the loading factor can be increased or decreased appropriately.