CP-MP10 is organic modified bentonite clay. It can be used in low, medium and high polarity (ketones, ester, ether esters, alcohols, aromatic)systems.
Typical properties
CompositionOrganic derivative of a montmorillonite clay
AppearanceFine powder, light yellow
Moisture content (105 Degree, 2hr)Max. 3.5%
Viscosity, mPa. S3000-6000
Loss on ignition %(1000 Degree)32-35
Bulk density0.46-0.48 g/cm3
Fineness (<74um, %)Min. 98%
Application:
Paint, such as epoxy paint, anticorrosion paint, wood paint
Ink
Cosmetics
Sealant
Using:
It is used in intermediate and high systems can dispersed with high-speed shearing and not need polar activator. If add polar activator and have pre-gel procedure, better performance may be achieved.
The product applied in low system if add polar activator and pre-gel can achieve better performance.
Adding level is commonly 0.2%~2.0%.