China Rock Grizzly Vibrating Feeder Machine for Jaw Crusher Plant

Introductions of Vibrating FederGeneral Introduction:
ZSW & GZD Series Vibrating Feeder is mainly used for coarse crushing, continuously and evenly feeding before the crusher, while screening fines, to increase crushing capacity. Especially in the feeding of heavy crushing construction equipment, it has been used greatly! Features and Advantages: linear trajectory, stable vibration, special rack design, adjustable to prevent trash material clogging rack space.
During processing, ZSW vibrating feeder can send various materials into the crushers continuously and evenly, at the same time, it can screen fine material to increase the crusher ability. The machine adopts double eccentric shaft vibration exciter, and the vibrating feeder can support impact force. It is widely used in metallurgy, coal ore, building material, chemical industry, etc.Vibrating feeder Structure:
It consists of vibrating frame, spring, vibrator, motor vibration frame and motor etc
Feature:
1:Linear motion trajectory, vibration smoothly;
2. Grid special designed, it can prevent material blocked;
3. Grid distance can be adjustment. Vibrating feeder Features & And Advantage:
HengYuan vibrating feeder has the characteristics of stable vibration, reliable operation and long service life. Its exciting force can be adjusted and the flow can be changed and controlled at any time. It is easy and stable to adjust. The vibrating motor is vibration source with low noise, low power consumption and, regulating performance and nonexistence of material clashing phenomenon. This kind of vibrating feeder with simple structure, reliable operation, easy installation and adjustment, light weight and small size is easy to be maintained. Dust pollution can be prevented when the closed structure of the fuselage is used. The installation, commissioning, maintenance of the vibrating feeder:
1, if the vibrating feeder is used for ingredients and dosing, it should be installed horizontally in order to ensure the uniform and stability of feeding and prevent the gravity flow of the material. The vibrating feeder can be installed down-dip to 10°for continuous feeding of the general material. It can be installed down-dip to 15°for the viscous material and the material with too much moisture.
2, the feeder installed should be horizontal and left a travel clearance of 20mm. Flexible connections should be used for the suspension.
3, before the empty test, all bolts should be solidified especially the anchor bolts of the vibrating motor which should be tightened again for continuous operation of 3-5 hours.
4, the two vibrating motors must rotate during the test.
5, during the feeding operation, you should always check the stability of the amplitude, current and noise. Stop the machine in time if abnormal cases occur.
6, fill the bearings of the motor with oil every two month. In the hot season, lubricant should be filled once a month.

Main Technical Data of Vibrating Feder
Model
Hopper Size (mm*mm)
Max feed Size (mm)
Feed Capacity (t/h)
Eccentric Shaft Speed (r/min)
Electric Power(kw)
Weight (excluding electric motor)(t)
Dimensions
(mm*mm*mm)
GZD 300x90
3000x900
450
40-100
----
2xx2.2
2.64
3050x1430x1550
GZD 370x100
3700x1000
500
100-150
----
2x3.7
3.69
4250x1874x1130
GZD 430x120
4300x1200
650
200-400
----
2x5.5
4.2
4955x2206x1120
ZSW-380x96
3800x960
500
100-160
500-714
11
4.2
3882x1684x1340
ZSW-490x110
4900x1100
630
120-280
500-800
15
5.5
4957x2400x2150
ZSW-590x110
5900x1100
630
200-350
750
22
6.1
6000x2500x2150
ZSW-600x130
6000x1300
750
400-560
500-800
30
7.8
6082x2580x2083
ZSW-600x150
6000x1500
800
460-575
500-800
30
8.7
6086x2662x2186
ZSW-600x180
6000x1800
800
600-800
500-800
37
11.8
6310x3262x2230
Note: Specifications may change without further notice.Please contact us before order.