China Rock Hydraulic Impact Crusher

Rock Hydraulic Impact Crusher

ModelPFC1214IIConditionNewFeeding opening size(mm)1100*1430ColorCustomizedSpecification (mm)1150*1400HS code8474209000Max.Feeding size(mm)500OriginChinaPower(kw)4P-132KWPackageExport standardMotor typeAC motorWarranty1year

Introduction
PF impact crusher is a new type of high-efficiency crushing equipment. This crusher mainly consists of board hammer, impact plate, board hammer pedestal, rotor, and feed port etc. Being simple, reliable and energy-efficient, our impact crusher is one of the most frequently used rock crushers.
impact crusher is ideally suited for breaking materials with a grain size of not more than 300mm and compressive strength of not more than 350 MPa. It can crush materials of all hardness, being an ideal piece of equipment for secondary crushing. The crushed materials with a cubic shape are widely used in the construction of highway, railway, airport, and others. Additionally, our impact crusher has obtained U.S. patent.
Performance and Features
1. Large feed port, deep crushing chamber, high reduction ratio (20:1)
2. Non-key connection, compact structure, reliable performance, easy operation, simple maintenance
3. High-chrome flat hammer, wear resistance, great impact force, long life
4. The gap between the impact plate and flat hammer is easy to adjust, so the discharge size is effectively controlled.
5.Low cost, easy maintain, and reliable operation
Working Principle
Impact crusher involves impact to crush material. During operation, the rotor driven by the motor performs high-speed rotation, and the flat hammer installed in the rotor collides with the entered material, later the material is thrown to the impact plate to realize crushing again. With the material repeatedly being thrown to each impact plate, crushing is continuously carried out in the impact chamber, and the material will be discharged when the required size is achieved. The size and shape of the material to be discharged can be adjusted by adjusting the gap between impact rack and rotor rack.
Steel structur foundation(optional) including ladder, platform,feeding hopper, discharging opening chute
Fabrication features
1. High reduction ratio and crushing efficiency;
2. No-board connection; the blow bar with high chrome (high chromed blow bar).
3. Impact plate with a special shape.
4. Crushed product with cubical shape.
5. Easy maintenance and reliable operation.
Technical Specification
Rock Jaw Spring Cone Vertical Hydraulic Impact Crusher
Basic Information

ModelPFC1214IIConditionNewFeeding opening size(mm)1100*1430ColorCustomizedSpecification (mm)1150*1400HS code8474209000Max.Feeding size(mm)500OriginChinaPower(kw)4P-132KWPackageExport standardMotor typeAC motorWarranty1year

Introduction
Hydraulic Impact crusher is suitable for the mining, building waste metallurgy, cement, building materials, chemical industry, water and electricity, quarry, coal mining, dry powder mortar, concrete mixing station, power plant desulfurization, quartz sand, etc.
The hydraulic impact crusher adopts advanced technology at home and abroad. Equipped with high chromium plate hammer, unique impact plate, row particle size is adjustable, the broken process can be simple, can be used for crushing more hard rock.
impact crusher is high efficient impact crusher developed by our company. This crusher is applied to primary, secondary and fine crushing of a variety of materials with compression strength not more than 250Mpa. Structural design has a unique scroll broken cavity and broken three areas, the use of rotor body sleeve keyless connection, high-performance wear-resistant plate hammer, insert the installation of forms, tilt chock unique profile counterattack lining board, multi-directional rack to open the door, screw or hydraulic device to open the replacement of wearing parts, maintenance more convenient. The large type machine also has special tool about changing and lifting blow bar for users to choose.
Working Principle
PFC Impact Crusher breaks materials with impact force. When materials enter the working area of hammer, they may be crushed under the high-speed shock and then thrown onto the impact device above the rotor for another crushing. Next, materials bounce from the lining plate to the working area of hammer again. This process repeats continuously until materials reach qualified granularity and are discharged. Adjusting the gap between the impact rack and the rotor rack can change the granularity and shape of finished products. Behind the impact plate is a spring safety device. When unbreakable materials enter the crushing chamber, the impact rack goes back Wards to discharge unbreakable materials out of the crusher.
Features
1. Specially designed three crushing chambers, which improves the production capacity of PFC impact crusher, makes the feed size bigger and the product shape better.
2. The optimally designed rotor provides powerful rotational inertia and strong impact force of hammer head, which improves the productivity and increases the crushing ratio.
3. Specially designed anti-wear alloy C shape hammer keeps the shape of impact face in product life cycle. It ensures that the product shape and particle size distribution is very stable.
4. Standard modular designed liner and tooth impact plate of PFC impact crusher have common-ability and interchangeability, which improve the utilization ratio and prolong the service life of PFC impact crusher.
5. Special hammer fitting structure improves hammers' stability and convenient dismounting, it also greatly improve the work efficiency.
6. The discharging opening size of the machine can be adjusted according to the requirement of product size and particle size distribution.
7. The standard hydraulic lifting device will be provided with the machine. It is optional to supply special lifting tools for replacing hammers, which is flexible and can be easily maintained.
Tri-curtain cavity hydraulic impact crusher

modelSpec.Feed opening size (mm)Max. feeding size (mm)Capacity (t/h)Power (KW)Weight (t)Overall dimension (mm)PFW 1210IIIФ1150x960570x99025070-12090-11015.02550x1870x2100PFW 1214IIIФ1150x1400570x143025090-170132-16019.02550x2310x2100PFW 1315IIIФ1300x1500625X1530300180-270160-20025.02960x2570x2380PFW 1318IIIФ1300x1800625X1830300220-300200-25030.02960x2870x2380

Two-curtain cavity hydraulic impact crusher
Two-curtain cavity hydraulic impact crusher

PmodelSpec.Feeding size (mm)Max. feeding size (mm)Capacity (t/h)Power (kW)Weight (t)Overall dimension (mm)PFW 1210IIФ1150x9601100x103040090-16090-11017.02400x1870x2550PFW 1214IIФ1150x14001100x1430500130-200132-16022.02400x2310x2550PFW 1315IIФ1300x15001200x1530600180-320160-20029.02700x2570x2800PFW 1318IIФ1300x18001200x1830700240-400200-25034.02700x2870x2800

We design flow chart of 80-120TPH limestone crushing plant in Indonesia
Client visting our factory and our facotory
Final aggregate for construction, subroad base, concrete mixing plant.
Delivery photos