China Rotary Drum Dryer Barrel Type Drying Machine Roller Dryer

ModelBY-1000Rotary drum dryerMotor power11KWSizeØ1000*10000mmDrying temperature130ºCWater content of raw materialsLower than 50% production efficiency600-800kg/hRemarks: Ø 220mm,3m length screw conveyor (feeding and discharging) is optional
CE approved rotary drying machine
Barrel type drying machine, Rotary drum dryer, Roller dryerUsing screManipulator Antenna w conveyor to send powder or piece solid wet sawdust into the dry pipe continuously. Under high speed airflow the sawdust is transported and dispersion, the moisture in the wet material is evaporated and the process of powdery or granular drying is obtained.Our roller dryer has advantage of fast drying speed, low fuel consumption and high thermal efficiency. Equip with discharging humidity temperature table, convenient and direct drying out water from a dry instrument. Equipped with automatic speed regulatinSpecialized Case & Box g feeder, electric scrolling sieve and discharging conveyor. According to drying out material required for water control best 8-12%, plate production, rods, etc. to solve the wood pellet production first off. Because it has speed regulating feeder and it can be regulate the speed according to the different moisture content of raw materials, the drying machine to achieve the best drying speed and effect. major component:
air heater, feeder, air drying tube, cyclone separator, fans etc..Working principle:
The heat source of the drum dryer comes from the combustion device, and the dryer adopts the flow heating mode. The raw material that needs to be dried is pushed into the barrel from the feed box and the feed, that is, the spiral sheet pushed the material to the rear. Because dryer is inclined position, under the action of gravity and rotating, the material is pushed to bottom, while, the material is repeatedly shoved to the top by shove plate and then be thrown down, then form a homogeneous material curtain in the cylinder. The material is fully exchanged with the hot gas flow in the cylinder. As the material is repeatedly thrown down, the moisture content of the flow is gradually dried, so as to achieve the purpose of drying.
Technical Parameters of drum dryerModelAbility (ton/hour)Main motorMain ReducerWeight (T)Power (kw)ModelModelSpeed RatioØ1.2*10m2.57.5Y160M-RZL50-16-I13.5Ø 1.5*12m3.3-4.910Y160L-6-BJZQ500-III-2F18.9Ø 1.5*15m4-618.5Y200L-6JZQ500-III-2F21Ø 1.8*12m4-611Y160L-6ZQ50-16II-216.4622.83Ø 2.2*12m7-1218.5Y200L-6JZQ650-III31.537.6Ø 2.2*14m7-1218.5Y200L-6JZQ650-III31.5Gas Generation EquipmAuto Repair Equipment & Tools ent & Parts 40
Suitable for the raw material
Wood chips, fiber, oat straw, com stover
Sawdust, rice husk, rye straw, straw
Shaving, the straw, wood shaving, mineral powder
Wood powder, grass, bamboo shavings, the broad bean straw