Machine Introduction:
1- Name :Rubber banbury mixerInternal rubber mixer, Rubbe kneader.
2- Function:
Dispersion kneader, equipped with a pair of rotors which perform relative rotation with thInverter e specific shape, is a kind of machine for intermittently plasticating and mixing the polymer materials under with adjustable temperature and pressure.
3- Range for materials processing:
Rubber Compoundsand End Products:
Natural Rubber, Synthetic Rubber, Mastication of NR, SBR, CR, EPDM, Fluorine Rubber, Silicone Rubber, ECT.
4- version:XSN-110/30
5- Description:
1)Maximum Dispersion & High Production
Double blades, proper clearance & high cooling effect gives excellent dispersion . Its production is 4 to 5 times more than an ordinary mixing mill thus saving on labor and electricity.
2)Easy Cleaningand Colour Change
Mixing chamber can be tilted which enables easy cleaning, because of this, different coloured compounds can be made nice.
3)Short Mixing Time
Mixing time ranging from 6 to 12 minutes depending on compound's specific gravity.6- Main parameters:
Version &ParametersXSN-35/30XSN-55/30XSN-75/30XN-110Mixing capacity (L)355575110Main Power(kw)557590160Brake Motor (kw)2.23.04.05.5Tilting angle1401401401400Air compressor (kw)5.57.51010Dust collectorHLL-10HLL-15HLL-20HLL-30Cooling water (MPA)0.3-0.40.3-0.40.3-0.40.3-0.4Heating Steam (MPA)0.5-0.80.5-0.80.5-0.80.5-0.8Electric Heater (kw)12151824Overall Size LxWxH (mm)3200x1900x29503750x1950x30503760x2143x30503930x3000x3660Weight(kg)6500780010500Structure features:
1.The mixing chamber is of drilled structure with quick and better beating/cooPlastic Machinery ling effects.
The inner wall is coated with hard chrome for a long service life.
2. Bulid-up welding of hard alloy for the two,three,four rSorting Machine idge top and two sides of the
rotor, all the working surfaces are coated with hard chrome, good appearance and abrasive
resistance. The cooling/heating medium can Car Electronics pass through the hollow of the rotor.
3. The top of the rotor adopts constant hydraulic pressure seal structure, the seal effect
is good with a long service time and high pressure lubrication automatic alarm when using up
the oil.
4. The upper bolt relieves the pressure automatically to protect the machine if the machine works a too long time under overload condition.
5. The working surface of up and down bolts are coated with hard chrome, good appearance and abrasive resistance. The cooling/heating medium can pass through the inner hollow of down bolt..
6. A rotary oil cylinder is used for the discharge door, smooth running and accurate positioning.
7. Use two shafts put-out hard teeth reducer and gear coupling or "+" type universal joint, the transmission is smooth wOther Equipment & Components ith high efficiency, low noise level and long service life.Machine Pictures:
Our certification: