China Rubber Mixing Mill for Rubber Sheet Mixer

Open mixing mill

The function of open mixing mill1.The mixing mill roller is made of alloy chilled cast iron .Their surfance are hard and wear resistance . Its hardness of surface is HRC68-75
2.The end of mixing mill machine rollers are supported by the roller ball bearing bush .It has the advantages of running smoothy ,energy saving , low noise and long life
3.The rubber mixing mill machine roll gap adjustment is manual control type . It is simple for operation
4.The mixing mill machine is equipped with overloading protection device , in order to protect the main parts from being damanged
5.The two roll mixing mill machine adopts the single drive type transmission structure . It adopts the nylon pin coupling to prevent main parts from being damanged due to the overload of transmission part
6.The rubber mixing mill machine base is integral type , the transmission mode is of closed transmission . so it is safe and easy for use
7.The machine is installed with the emergency button and pulling rope as the safety device
8.This machine are installed with four sets lubrication device and suitable for grease lubrication
9.The rubber mixing mill machine adopts the PLC control cabinet , the machine will be suitable for your local industrial voltage and frequency

Parameters/versionXK-160XK-250XK-400XK-450XK-560Roll diameter160250400450560Roll length320620100012001530Front roll surface speed(m/min)8.8915.318.6524.3227.72Friction ratio1:1.351:1.11:1.271:1.271:1.2Max. nip48101515Feeding capacity per1-210-1518-3525-5035-50Power(kw)5.518.5375590Size( l*w*h) (mm)1160*920*13703120*1322*15004350*1850*17805670*2390*16705845*2284*1978Weight(kg)1000400076001200023000

♥One year guarantee for whole machines
♥24 hours technical support by email
♥Calling or door - to -door service.
♥Provide videos for each machine.
we will send one engineer to your factory to guide installation and test running the production line, until you can operate themachine skilled