China Rubber Water Stop Strips PVC Plastic Water Stop Strips

The product of expansive water called PZ standard water expandable sealing water. It is a new type of waterproof material, which has the performance of the general rubber products, and has the water to expand its own performance. Waterproof, waterproof effect than ordinary rubber seal is more reliable.
My company produces products type of expansive water has the characteristics of water:
A, in the case of water will produce less 2-5 times the expansion deformation, and full of all the irregular surface of the irregular surface, hole and gap, while a huge contact pressure, to prevent leakage;
B, when the rigid joint and construction joint displacement occurs, resulting in the gap caused by the gap beyond the elastic range of the material, ordinary rubber sealing material lost the sealing effect, and the product can also through water swelling to seal.
C, the use of water swellable rubber as sealing sealing sealing material, not only the amount of energy, but also can eliminate general elastic material due to too large compression caused by the characteristics of elastic fatigue, waterproof effect is more reliable, water resistance, resistance to chemical properties and aging resistant performance is good.
D, it is mainly applied to the shield construction method now masonry joint water-proof, building distortion seam, construction joints with sealing strip and a metal component, precast concrete ground waterproofing.

Item
Index
B
S
J
1
Hardness, Shore A
60±5
60±5
60±5
2
Tensile Strength, Mpa≥
18
15
10
3
Break and elongation, %≥
380
380
300
4
Compression
70°cx24h,% ≤
35
35
35
23°cx168h,%≤
20
20
25
5
Tear strength, KN/m ≥
30
25
25
6
Brittleness temperature≤
-45
-40
-40
7
Air aging
70°Cx168h
Hardness, Shore A
8
8
-
Tensile Strength, Mpa≥
12
10
-
Break and elongation,%≥


-
100°Cx168h
Hardness, Shore A
-
-
8
Tensile Strength, Mpa≥
-
-
9
Break and elongation,%≥
-
-
250
8
Ozone aging 50pphm:20%, 48h
Grade 2
Grade 2
Grade 0
9
The bonding of rubber and metal
The section is in the elastomer
Specifications section 10 x 25, 10 x 30, 10 x 40, 20 x 30, Φ20,Φ30,, R15 x R10 such as specification and length according to the user's requirements. Please contact our technical department for other specifications.