China SAE-J444 Low Carbon Blasting Steel Shot S460 for Machinery

Name

low carbon steel shot

Chemistry

(C)

0.1~0.3%

(Mn)

0.35~1.20%

(Si)

0.40~1.20%

(S)

≤0.05%

(P)

≤0.05%

Average Hardness

46-51HRC

Deviation

±3.0HRC(±40HV)

Type

S110, S170, S230, S280, S330,

S390, S460, S550, S660, S780

Diameter

0.3mm,0.5mm,0.6mm,0.8mm,1.0mm,

1.2mm,1.4mm,1.7mm,2.0mm,2.5mm

Density

7.4g/cm3

3.Low Carbon Steel Shot Applications

Steel Shot blast media all produced according to SAE standard.
(1) Using in wheel blast and pressure blast systems for stripping, cleaning, deburring, finishing and metal surface-improvement.
(2) Finishing operations, it produces smooth & polished finishes.
(3) Strengthens metal surfaces in peening applications.
Available in 3 Hardness and reclaimable and re-usable up to hundreds of times depending on blast parameters and applications.

4.Low Carbon Steel Shot Production technology

5.Low Carbon Steel Shot Certificate

6.Low Carbon Steel shot Normal Packing

1). 25kg (55lb) per bag,then 40 bags put in a 1000kg (2200lb) bulk bag.
2). 25kg (55lb) per bag,then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.
3). 1000kg (2200lb) loose in one ton bulk bag.

7.Company Information
Jinan Junda Industrial Technology Co.,Ltd. is located in Jinan,Shandong Province,China,which is the daughter company of Honest Horse (CHINA) Holding Limited.We are the manufacturer of abrasive media for more than 15 years experience in north China.
Abrasives media we manufacture:
Bearing steel grit
Cast steel grit
Steel shot
Steel cut wire shot
Garnet sand
Our old and new customers distribute over 100 countries around the world, in Asia, Middle East area,Europe,Africa,North America,South America,and Australia,etc.
We supply good qualified abrasives products to our customers and drive to provide best service to our customers.
If you are interested in our abrasives, welcome email us for more information.