China SBlasting Room SBlasting Booths SBlasting Cabin

Sand Blasting Equipment of Suction Type Recovery System
Sand blasting roomis mainly used for surface treatment and strengthening of steel, castings, aluminum alloy parts and other parts. After sandblasting,the surface contaminants, oxide skin, welding slag and the waste paint will be removed, causes the workpiece surface to be bright and clean, simultaneously reduce the workpiece internal stress, enable the workpiece surface to obtain the strengthening, thus achieves to enhance the workpiece surface and the intrinsic quality.As the honeycomb floor has no moving mechanical parts, there is nothing to wear out or breakdown, resulting in virtually 100% room availability.The pneumatic conveying principal of the honeycomb floor also means that the abrasive is instantaneously recovered from the floor, eliminating abrasive "dead spots" and overcoming the need for large amounts of abrasive in storage.Our system can utilize the one Ventilation/Recovery Dust Collector to both ventilate the blast room at the desired airflow and recover the abrasive from the honeycomb floor Modules to clean it.In order to gain the better sight for the operation, we suggest to assemble another dust collector.1. Sand blasting room main compositions1Blasting chamber2Abrasive storage hopper3Sandblasting assembly4Bucket elIndustrial Adhesive Products evator (Mechanical Type)5Screw conveyor (Mechanical Type)6Elevator (Mechanical Type)7Roller conveyor (Mechanical Type)8Separator9Abrasive recycling system10Lighting system11Dust Collector12Steel grating13Trolley system14Electric control system
2. Structural characteristice of Sand Blasting Booths
This machine is aspecial reciprocating sand blasting machine, which consists of Sand blasting chamber, Sand blasting device, Screw conveyor, Elevator, Separator, Abrasive recycling system, Trolley system, Lighting system, Bottom funnel, Steel grating, Dust removal system, Electric control system, etc.
Sand blasting system
We fully take into account the operation convenience of the workers, specifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.Abrasive recycling system
This machine adopts the patented shot valve produced of our company; it can accumulate acertain time in blasting, through the manual control to provide the shot ball to the blasting device.Dust removal system
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedustElectromagnetic Equipment ing efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.Electric control system
Set shot ball circulatory failure alarm function, if any parts of the system fails, the above components automatically stop running, to prevent the shot ball stuck and burning power device.3. Our service:1Reply your inquiry in 8 working hours.2Experienced staffs answer all your questions in time.3Customized design is available.4Exclusive and unique solution can be provided to our customer by our
professional engineers and staff.5Special discount and protection of sales are provided to our distributor.6We are professional manufacturer of shot blasting Machine. Have aprofessional
design team with more than 20 years experience engineers, competitive
with good quLCD Module ality.7As an honest seller, we always use superior raw material, advanced machines,
skilled technicians to ensure our products to be finished in high quality and
stable feature.8prompt delivery, site installation and commissioning.
4. Notice:
According to your requirements, the most suitable machine will be designed for your workpieces, please indicate the following details.
1). What kind of workpiece you clean?
2). The workpiece size, length, width, height and weight of maximum workpiece.
3). What's your production capacity per day (8 hours)?
based on this detailed information, the detailed technical proposals will be sent to you for reference.5. FAQ:
After-sale service:
1. Installation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience :Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
5. OurRadio shot blasting spare parts are high quality with Cr20S High Chrome, ZGMn13, etc.Trade Information:
MOQ: 1set.
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB (FCA), CIP, CFR, CIF, DDU, DDP, Turnkey.
Payment term: 30% deposit by T/T, the balance paid before delivery or L/C at sight.
Delivery time: Within 20-60 days according to different type equipment.Any question pls kindly contaResonator ct with us and welcome to visit our factory!George Xu
Cell: 86 13310666957