China SBlasting SBlasting Cabinet Abrasive Blasting

QUALITY IS OUR CULTURE!Air Suction Abrasive Recycling SanSignal Filter d Blasting Cabinets
Suction type sand blasting chamberis no pit structure and little wear parts, is mainly used for surfaceNon Woven Bag cleaning and strengthening of steel, castings, aluminum alloy parts and other parts, can remove the complex workpiece surface contamination, oxide skin, welding slag, the waste paint and so on, the workpiece surface achieve bright and clean, simultaneously reduce the workpiece internal stress, enables the workpiece surface to obtain the strengthening,thus achieve the purpose of improveing workpiece surface and the intrinsic quality.1. Suction type sand blastingroom main compositions1Sandblastingchamber2Abrasivestoragehopper3Sandblastingdevice4Honeycombfloor5Separator6Lightingsystem7DustremovalsystemShaft 8Trolleysystem9Electriccontrolsystem

2. Structural characteristice of Sand Blasting Booths
This machine is a special reciprocating sand blasting machine, which consists of Sandblasting chamber, Sand blasting tank, Abrasive recycling system, Trolley system, Lighting system, Dust removal system, Electric control system, etc.Blastingchamber
Blastingchambershellismadeofsectionsteel,rockwoolcompositepanels,anditisastrong,sealandspaciousoperationspacetocleantheworkpiece.Blastingchamberisconsistofbodyshell,leftandrightsidewall,lateralwall,roofguardboard,etc. The sandblastingchamberadopts wearresistantrubber,andrubberplatespinnedbydepressionbarpressure.Thiscanprolongtheservicelife,reducenoise.Sand blasting system
We fully take into account the operation convenience of the workers, speGift Box & Bag cifically increased the sand blasting chamber operating space, set lighting system and platform, so that workers can operate convenient, effective and comprehensive.Honeycombfloor
Detachable honeycomb floor is on the basis of old honeycomb floor, after many times optimization and improvement, fully considering the wear and maintenance of honeycomb floor and recover pipe during the long-term use, making the floor and pipe into detachable module combination. The maintenance of the equipment is easy and fast, avoid more accessories changing and reduce the cost of equipment maintenance in the course of long time operation. This structure is initiated firstly by our company and successfully applied to many customers' environmental sand blasting room project. The pit of this kind structure sand blasting room only need less than 0.5 m.Separator
This machine adopts advanced Model BE full shutter type separator. The separator is mainly composed of air wash area, barrel sift, abrasive hopper, manual abrasive controlling valve, etc.Dust removal system
This machine adopts Cartridge or bag type dust collector, is exhausted air produced during working. The dedusting efficiency is up to 99.6%, powder density is less than 100mg/m3,much stricter than the national standard.Electric control system
Adopt failure alarm function, if any parts of the system fails, the components automatically will stop running, to prevent the abrasive stuck and burning power device.Our service:1Replyyourinquiryin8workinghours.2Experiencedstaffsanswerallyourquestionsintime.3Customizeddesignisavailable.4Exclusiveanduniquesolutioncanbeprovidedbyourprofessionalengineersandstaff.5Specialdiscountandprotectionofsalesareprovidedtoourdistributor.6WeareprofessionalmanufacturerofshotblastingMachine.Haveaprofessionaldesign
teamwithmorethan20years experienceengineers,competitivewithgoodquality.7Asanhonestseller,wealwaysusesuperiorrawmaterial,advancedmachines,skilled
technicianstoensureourproductstobefinishedinhighqualityandstablefeature.8promptdelivery,siteinstallationandcommissioning.
Notice:
According to your requirements, the most suitable machine will be designed for your workpieces, please indicate the following details.
1. What kind of workpiece you clean?
2. The workpiece size, length, width, height and weight of maximum workpiece.
3. What's your production capacity per day (8 hours)?
based on this detailed information, the detailed technical proposals will be sent to you for reference.FAQ:
After-sale service:
1. Installation and commissioning issue: We will send one technicians to assist with machine installation and commissioning, customer pays for return tickets, hotel and diet. Customer need arrange skilled worker and prepare various installation machinery and tools.
2. Warranty time:12 months from date of commissioning completion, but no more than 18 months from date of delivery.
3. Supply full english documents: including general installation drawings, pit design drawings, manual book, electric wiring diagram, electric manual book and maintenance book, etc.
4. Exported experience : Many countries, such as The USA, Russia, UK, Ukraine, Australia, Malaysia, UAE, Egypt, Mexico, Brasil, etc.
5. Our spare parts are high quality with High Chrome CastingsResistor & Potentiometer , ZGMn13, etc.Trade Information:
MOQ: 1set.
Settlement Currency: USD, RMB, EUR.
Trade mode: FOB (FCA), CIP, CFR, CIF, DDU, DDP, Turnkey.
Payment term: 30% deposit by T/T, the balance paid before delivery or L/C at sight.
Delivery time: Within 20-60 days according to different type equipment.
Any question pls kindly contact with us and welcome to visit our factory!