China SS304 316L Non-Retention Stainless Steel Sanitary Ball Valve Hygienic Ball Valves Clamped 3 PCS Type Ball Valve 3A DIN

Wenzhou Santhai Valve Pipe Fittings Co., Ltd (Since 2006)

It Is Widely Used In Beverage, Brewing, Oil Refinery, Cosmetic, Chemical Industries.
˙ Free of maintenances
˙ Compact and portable
˙ Small operating torque
˙ Gasket complies with PTFE FDA 177.2600
˙ Hand lever can be installed on the side of the valve body, no matter of the flow direction.
˙ Connection ends: thread, clamp, weld,flange, DIN, SMS, RJT, FIL.
˙ It can match with pneumatic and electricactuators.
˙ Material for the part contacted with media is AISI 304/316L. Other part is AISI 304
˙ Type of valves: One way ball valve, three-piece ball valve. Three-way ball valve
˙ Type of cores: T type, L type, direct type.
˙ Material quality:AISI 304,316L
Techical Datas

MaterialAISI304 AISI316LSpecificationDN25-100 & 1"-4"StandardISO, DIN, 3A,SMS etcConnectionWelded, Clamped, Threaded, FlangedWorking Principalmanual operation or driving device operationFlow patternstraightSeat materialPTFE, PCTFE, PEEK or upon your requestOrifice size2mm to 4.8mmBody construction3-piece precision cast bodyTemperature-20degree celsius~135degree celsius

High Quality DIN SMS Clamped Type Sanitary Ball Valve
Application:
Ball valve is well used in food, beverage, chemical and cosmetic industries to control medium flow. The full port design with zero restriction makes it an optimum choice for viscous and particulate liquids.

Working Principle:
Manual ball valve can be operated through actuator(90 degree rotary handle), actuator with the hand is to revolve the axial movement unto 90 degree, so the valve can open or close.
Pneumatic actuator is to covert the axial movement of piston to be 90 degree rotation of valve shaft, so that the valve can be open or close to achieve the requirement of control and open /close for the pipeline system.

Standard Design:
Various standards of ball valves can be provide can be provided to clients: DIN, 3A, SMS, ISO/IDF, BS/RJ, ASME/BPE etc.
Main Details:

Body MaterialSS304/ SS316LSeal MaterialPTFE+EPDM(Double Layer)/EPDM/Silicon/VitonStandardDIN/SMS/IDF/3A/BPE/ ISOSize1/2" to 4" (DN15-DN100)Working Pressure1.6~6.4MpaWorking Temperature-10 to 121 degree CConnection EndThreaded/Welded/Clamped End/UnionAvailable StructureStraight way type/ Three ways typeSurface PolishInternal(Ra<0.6um), External(Ra<1.6um)OEMAvailableShipment WayBy Sea (Ningbo/Shanghai Port), By Air, By ExpressTerm of Payment100% T/T, 30% advance and balance 70% before delivery.Packaging Details:Bubble pack for each within carton box; Plywood case is also available for sea transportation.