China SUS AISI 410s 410L Stainless Steel Plate

SUS AISI 410S 410L Stainless Steel Plate
Product Description
Stainless steels are a family of iron based alloys that contain a minimum of 10.5% chromium (CR). The presence of chromium creates an invisible surface film that resists oxidation and makes the material passive or corrosion resistant (stainless). There are multiple families of stainless steel which are designed for various applications and uses. Stainless grades can be further modified to meet various processing, corrosion, temperature and strength conditions.

Type 410 (UNS S41000)
Description
Type 410 is a corrosion and heat resistant martensitic stainless steel containing approximately 12% chromium offering a wide range of mechanical properties through heat treatment. This grade offers a moderate level of corrosion resistance and the maximum resistance is obtained by hardening through heat treatment followed by polishing. Type 410 is used for cutlery applications, kitchen utensils and hand tools and is magnetic in both the annealed and hardened conditions.
Chemical Composition
Chemical Composition (wt%) limits as specified in ASTM A240 and ASME SA240*.

Element410Carbon0.08-0.15Chromium11.5-13.5Nickel0.75Manganese1.00Silicon1.00Phosphorus0.040Sulfur0.030

* Maximum, unless range is indicated
Mechanical Properties
Mechanical property requirements for annealed product as specified in ASTM A240 and ASME SA240.

Property410Yield Strength, min. (ksi)30Tensile Strength, min. (ksi)65Elongation, min. (%)20Hardness, max. (Rb)96

Physical Properties
Physical properties for Type 410 stainless steel

Property410 DataDensity, lb/in30.280Modulus of Elasticity, psi29.0 x 106Coefficient of Thermal Expansion, 68-212˚F, /˚F5.5 x 10-6Thermal Conductivity, Btu/ft hr ˚F14.4Specific Heat, Btu/lb ˚F0.11Electrical Resistivity, Microohm-in22.4

Standards
Typical standards for Type 410 stainless steel
SUS AISI 410S 410L Stainless Steel Plate
Type 409 (UNS S40920)
Type 409 is a heat resisting ferritic stainless steel providing good oxidation and corrosion resistance compared to carbon steel. This titanium stabilized grade was developed for automotive exhaust systems but its good formability, weldability, and corrosion resistance has led to its use in other applications. The corrosion resistance of Type 409 is better than coated carbon steel, similar to that of Type 410 stainless steel, and less than that of Type 304/304L stainless steel. Type 409 is not suggested for cosmetic or surface critical applications as light surface rusting can form during exposure to atmospheric conditions.

Element409Carbon0.03Chromium10.5-11.7Nickel0.50Manganese1.00Silicon1.00Nitrogen0.030Phosphorus0.040Sulfur0.020Niobium8 x (C+N) min / 0.15-0.50

* Maximum, unless range is indicated
Mechanical Properties
Mechanical property requirements for annealed product as specified in ASTM A240 and ASME SA240.

Property409Yield Strength, min. (ksi)25Tensile Strength, min. (ksi)55Elongation, min. (%)20Hardness, max. (Rb)88

Physical Properties
Physical properties for Type 409 stainless steel

Property409 DataDensity, lb/in30.279Modulus of Elasticity, psi32.0 x 106Coefficient of Thermal Expansion, 68-212˚F, /˚F6.5 x 10-6Thermal Conductivity, Btu/ft hr ˚F13.2Specific Heat, Btu/lb ˚F0.11Electrical Resistivity, Microohm-in24.8

SUS AISI 410S 410L Stainless Steel Plate

Other common Stainless steel 304/304L Grade :

Type 304/304L is the modern version of "18-8" stainless steel containing approximately 18% chromium and 8% nickel and is the most commonly specified stainless steel used throughout the world. Type 304/304L is a versatile, general purpose stainless steel with good resistance to atmospheric corrosion, and to many chemicals and food and beverages. These grades can be specified in the annealed condition where they have very good formability. Higher nickel versions can be specified to enhance multi-stage deep drawing characteristics. Higher strength, cold-worked conditions can also be specified for Type 304/304L for spring type applications. Type 304/304L is non-magnetic in the annealed condition but may become slightly magnetic as a result of cold working.
Type 304L can be dual certified as 304 when the composition meets the lower carbon limit of 304L and the slightly higher strength levels of 304. Type 304L should be specified for welded applications as the low carbon version eliminates chromium carbide precipitation and enhances the corrosion resistance in the as-welded condition.
Another common material Stainless steel 316/316L Grade :
Alloy 316/316L is molybdenum-bearing austenitic stainless steel. The higher nickel and molybdenum content in this grade allows it to demonstrate better overall corrosion resistant properties than 304, especially with regard to pitting and crevice corrosion in chloride environments. In addition, Alloy 316/ 316L provides excellent elevated temperature tensile, creep and stress-rupture strengths, as well as outstanding formability and weldability. 316L is the lower carbon version of 316 and is immune from sensitization; therefore, it is very frequently used in heavy gauge welded components.

Alloy 347 is a stabilized, austenitic, chromium steel containing columbium which allows for the elimination of carbide precipitation, and, consequently, intergranualr corrosion. Alloy 347 is stabilized by the additions of chromium and tantalum and offers higher creep and stress rupture properties than alloy 304 and 304L which may also be used for exposures where sensitization and intergranualr corrosion are of concern. The addition of columbium also allows Alloy 347 to have excellent corrosion resistance, even superior to that of alloy 321. 347H is the higher carbon composition form of Alloy 347 and demonstrates improved high temperature and creep properties.

Alloy 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance. It has excellent resistance to intergranular corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 - 1500°F (427 - 816°C). The alloy resists oxidation to 1500°F (816°C) and has higher creep and stress rupture properties than alloys 304 and 304L. It also possesses good low temperature toughness.
Alloy 321H (UNS S 32109) is the higher carbon (0.04 - 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000oF (537°C). In most instances, the carbon content of the plate enables dual certification.
Alloy 321 cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices.

The 309 stainless steel has a higher corrosion resistance and strength compared to 304 stainless steel. This product is versatile and known for its high heat treatment capabilities.Great ductility, weldability, and high-temperature properties make 310 Stainless Steel the ideal choice for projects that require service at temperatures up to 1150 degrees Celsius. Grade 310 resists oxidation and is also used at temperatures up to 1040 degrees Celsius intermittently. Similar to other austenitic steel grades, toughness down to cryogenic temperatures is another feature of 310.
Other common 300series grade

SUS AISI 410S 410L Stainless Steel Plate

ItemDescriptionStandardASTM A240 / AISI / DIN / JIS / GB
Grade201/202304/304L/304H/309S/310S/316L/316Ti/317L/321//S31803/S32205/904L409L/410S/420J1/J2/430 439 441 444 446Thickness0.3-6.0mm for cold sheet scope; 3.0-100mm for hot rolled scopeWidth&Length1000mm/1219mm/1500mm/1800mm/2000mmLength from cutting, as requirementSurfaceMill surface: 2B/BA/No.1Processing surface: 8k mirror/Hairline/No.4 Satin/Bead blast/Color etchedProtectionTransparent film/ Blue fulm/PVC film or laser filmPackageStandard export package with metal pallet + angle bar protection +ProcessingEdging/Laser(Plasma/Water Jet) cutting/Leveling/Slitting

SUS AISI 410S 410L Stainless Steel Plate
Products Show



SUS AISI 410S 410L Stainless Steel Plate
For the common grade as 201, 304, 316L material, also we can supply the surface processing as Mirror, Golden mirror, Hairline, Bead Blast etc.
SUS AISI 410S 410L Stainless Steel Plate
SUS AISI 410S 410L Stainless Steel Plate
SUS AISI 410S 410L Stainless Steel Plate
The reason why you choose Tianjin TEDA Ganghua
ISO&SGS&BV Audited company
Advanced production line and inspection equipment
Finished Product Inventory: More Than 800 Tons.
prompt delivery from stock.
Convenient transportation
We can offer competitive price with best quality&service
More than 10 years export experience
More than 20 years industry experience
More than 30 countries worldwide customers
If you are interested in our products, pls feel free to contact us, we will try our best to support Our business, expect our cooperation chance.