China Safety Beam

Description
Infra-red beam is suitable for automatic door, it provides safety protection to people pass through.

The safe beam can be installed at all kinds of door frames because of its small size.

In addition, microprocessor operating system redefines the safety standards to protect pedestrians,

and develops a new smarter and higher performance range.
Technical Data

Technical: infra-red, microprocessor

Installation height: Min 0.2m above floor

Distance between beams: Min. 0.2m(reverse beam)

Distance to door face: 2 cm

Min. range: 1 m

Max. range: 5m( installed at height of 0.2m)

avertence angle: 8 °

Detection mode: cut off beam

Reaction time:

Relay output: ≤ 40ms

Hold time:

Relay output: 300ms

Power voltage: 12-24V AC±10%

12-24V DC±10%

Power consumption: <1 W

Signal display: each beam has a light on the

controller box

Adjustment:( turn DIP switch)

1 single/double beam

Environment temperature: -20ºC~+55ºC

Wire length: 5m

single beam double beam

choose installation height

make a height mark

beam is above floor at least 20cm

choose installation height 1 & 2

distance between h1 & h2

at least 30cm

make marks h1 & h2

beam is above floor at least 20cm

drill a vertical hole 13mm(or 1/2") on

each side of the frame

drill two vertical holes 13mm(or 1/2")

on each side of the frame

Detector wire colors

receiver: white/black

sender: white/black

Wire colors

receiver: black

sender: gray